TRENDnet TV-IP422 v1.1R IP Camera Firmware 1.1.1.73 Download

Posted at December 24, 2024 by PCI-DB Team

TRENDnet TV-IP422 v1.1R IP Camera Firmware 1.1.1.73 Description

Changes:

- Upload.asp removed.
- Updated save configuration file encryption type.
- Set RTSP default authentication to "digest".

Installation Procedure:

- Save the downloadable package.
- Log into the unit’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

Note:

- Please do not save the camera's configuration file from the old firmware and restore it after the firmware upgrade.
- After a successful firmware upgrade, please reset the camera to factory default and reconfigure the camera. We strongly recommend that you change the camera's administrator's account password.
- Please ensure you update to firmware version 1.1.1 build 73 from version 1.1.0 build 67 or higher. If you have an older firmware, please update to version 1.1.0 build 67 first.

About Network Camera Firmware Updates:

Updating to a newer firmware version than the one already installed on your network camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera's firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don't end up with a broken device. This process isn't intended to be destructive, but still, it's best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TRENDnet Drivers