Intel S1200SPOR Server Board OFU Firmware 03.01.0021 Download

Posted at November 24, 2024 by PCI-DB Team

Intel S1200SPOR Server Board OFU Firmware 03.01.0021 Description

Versions:

- BIOS: 03.01.0021
- ME: 04.01.03.021
- BMC: 01.08.10828
- FRUSDR: 0.24

BIOS 03.01.0021 Changes:

1. Re-sign BIOS package with production key.

BMC 01.08.10828 Changes:

- This BMC FW update package is to be used only on EPSD server baseboards and does NOT support customer reference boards (CRB) or silicon reference platforms (SRP) such as Rose City. Contact your PDT to determine where to download the BMC FW for these products.
- The BMC FW image file in this package is to be used only with the provided FWPIAUPD update utility. Using the FW image file with a SPI flash device programmer will result in a non-functional system.

FRUSDR 0.24 Changes:

- Modify 'Agg Thrm Mgn 1' Sensor's reading mask from 1010 to 0000.
- Modify 'Front Panel Temp' Sensor's reading mask from 3B3B to 1B1B.

Please follow the below procedure to update ME using UEFI iFlash32 14.0 Build 11

1. Boot the system to EFI Shell
2. Download ME release package
3. Unzip the ME release package to HD or USB Flash Drive
4. Map the respective storage device in system with the command Shell> map -r
5. Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:)
6. Run the IFlash32 utility on the prompt. Use ME_xx_xx_xx_xxx.cap file when ME operational Image update is required. Use MEComplete_xx_xx_xx_xxx.cap file when Only whole ME Image update is required. fs0:> IFlash32 [File Name] /u /ni
7. Reboot system after the update is completed.

Use OFU to update system firmware by the following steps:

- Install OFU on Windows or Linux system
- Download the latest firmware update package from http://downloadcenter.intel.com/
- Unzip package to a folder
- Run the following command in Windows command line/Linux terminal window: <OFU install folder name>:flashupdt -u <package folder name>flashupdt.cfg

To update from Windows Preboot Execution Environment (WinPE)

The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:
- Boot server with customized WinPE CD
- Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization)

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device's functionality in the event of a software update either turning up faulty or causing the unit's overall performance to drop. However, bear in mind that applying an older firmware isn't recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it's best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device's firmware. Also make sure you constantly check with our website to ensure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers