Gigabyte GA-F2A78M-HD2 (rev. 3.1) Microsoft UAA Driver 5.10.0.5010 Download

Posted at December 22, 2024 by PCI-DB Team

Gigabyte GA-F2A78M-HD2 (rev. 3.1) Microsoft UAA Driver 5.10.0.5010 Description

Specifications:

APU:
- FM2+ Socket:
- AMD A series processors
- AMD Athlon series processors

Chipset:

- AMD A78

Memory:

- 2 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory
- Dual channel memory architecture
- Support for DDR3 2400(OC)/2133/1866/1600/1333 MHz memory modules
- Support for AMD Memory Profile (AMP)/ Extreme Memory Profile (XMP) memory modules

Onboard Graphics:

- Integrated Graphics Processor
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200
- 1 x DVI-D port, supporting a maximum resolution of 2560x1600
- 1 x HDMI port, supporting a maximum resolution of 4096x2160
- Maximum shared memory of 2 GB

Audio:

- Realtek ALC887 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF Out

LAN:

- Realtek GbE LAN chip (10/100/1000 Mbit)

Expansion Slots:

- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x1 slot
- 1 x PCI slot

Multi-Graphics Technology:

- Support for AMD Dual Graphics technology
- Support for AMD Eyefinity technology

Storage Interface:

- 4 x SATA 6Gb/s connectors
- Support for RAID 0, RAID 1, RAID 10, and JBOD

USB:

- 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

Internal I/O Connectors:

- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 4 x SATA 6Gb/s connectors
- 1 x APU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 1 x USB 3.0/2.0 header
- 2 x USB 2.0/1.1 headers
- 1 x serial port header
- 1 x Clear CMOS jumper
- 1 x chassis intrusion header

Back Panel Connectors:

- 1 x PS/2 keyboard/mouse port
- 1 x D-Sub port
- 1 x DVI-D port
- 1 x HDMI port
- 2 x USB 3.0/2.0 ports
- 2 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In, Line Out, Mic In)

I/O Controller:

- iTE I/O Controller Chip

H/W Monitoring:

- System voltage detection
- APU/System temperature detection
- APU/System fan speed detection
- APU/System fan speed control

Form Factor:

- Micro ATX Form Factor: 22.6cm x 17.4cm

About Sound Cards:

Usually, Windows operating systems apply a generic audio driver that allows computers to recognize the sound card component and make use of its basic functions.

When enabled by proper files, the characteristics of the sound card (like model, manufacturer, number of channels) are completely available to computers, and all its features are made accessible.

Updating the audio version can improve sound quality, resolve different compatibility issues, fix related errors spotted throughout the product’s usage, add support for new operating systems, and bring various other changes.

As for applying this package, the steps are quite simple since each producer intends to uncomplicate things for users: just download the package, run the setup, and follow the on-screen instructions.

Bear in mind that, even though other operating systems might be compatible as well, it is not recommend that you apply any software on platforms other than the specified ones. Also, when the installation has finished, do perform a restart to ensure that all changes take effect properly.

Therefore, if you wish to install this audio version, click the download button and apply the package. Remember to check with our website as often as possible to stay “updated one minute ago.”

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Microsoft Drivers