Timecode Systems Camera Adapter USB Firmware Updater 4.27 Download

Posted at April 27, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Timecode Systems Camera Adapter USB Firmware Updater 4.27
Category	Scanner Digital Camera Webcam
Manufacturer	Other
File Size	1.8 MB
Supported OS	Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit

Timecode Systems Camera Adapter USB Firmware Updater 4.27 Description

Follow these simple steps to add the latest firmware to your Timecode Systems products on a Windows system. If you have not previously installed the PC updater software application then please follow The Instructions. If you have previously installed a Timecode Systems PC updater software application then please uninstall this earlier version before following The Instructions.

: pulse

- The latest firmware version is: 4.27
- The latest FPGA version is: 2.02
- The latest WebView version is: 3.05
- V3.05 Changes: UltraSync ONE support, fixed GoPro Global Commands, TS-TCB screen mirror from SD Recorder, minor bug fixes.
- V3.04 Changes: Cosmetic change only to fix updater issue where the Blink Hub stopped working after latest update on Mac.
- V4.27 Changes: Fixes issues causing units to freeze during updating.
- V4.26 Changes: Minor bug fixes.
- V4.24 Changes: Minor bug fixes. Enhanced user interface for group controls to support SyncBac VR.
- V4.22 Changes: RELEASE CANDIDATE: Minor bug fixes.

: wave

- The latest firmware version is: 4.27
- The latest FPGA version is: 2.02
- The latest WebView version is: 3.05
- V3.05 Changes: UltraSync ONE support, fixed GoPro Global Commands, TS-TCB screen mirror from SD Recorder, minor bug fixes.
- V3.03 Changes: Cosmetic change only to fix updater issue where the Blink Hub stopped working after latest update on Mac.
- V4.27 Changes: Fixes issues causing units to freeze during updating.
- V4.26 Changes: Minor bug fixes.
- V4.24 Changes: Minor bug fixes. Enhanced user interface for group control to support SyncBac VR.
- V4.22 Changes: RELEASE CANDIDATE: Minor bug fixes.

SyncBac PRO

- The latest firmware version is: 1.25
- The latest FPGA version is: 1.06
- V1.25 Changes: Minor bug fixes.
- V1.24 Changes: Minor bug fixes. Enhanced user interface for group control to support SyncBac V04R.

Mini trx+

- The latest firmware version is: 4.27
- The latest FPGA version is: 2.02
- V4.27 Changes: Fixes issues causing units to freeze during updating.
- V4.26 Changes: Minor bug fixes.
- V4.24 Changes: Minor bug fixes.

Denecke TS-TCB

- The latest firmware version is: 4.27
- The latest FPGA version is: 2.02
- V4.27 Changes: Fixes issue causing units to freeze during updating.
- V4.24 Changes: Minor bug fixes.

BLINK Hub

- The latest IOS App version is: 1.06
- The latest Android App version is: 1.01
- The latest Mac OS X version is: 1.60
- Added additional support for sending text information via BLINK RF to multiple connected Denecke TS-TCB Slates.
- Added Sound Devices 6 Series mixer ‘Scene/Take’ info auto mirroring to BLINK connected TS-TCB Slates.
- Feature to add notes for Sound Devices 6 Series Mixers TAKE metadata.
- Added Slate text centering.
- Setting brightness settings from app, adjusted across all devices.
- Fixed IOS 10 & Mac OS X Sierra connection issues.
- Improved BLINK Hub Communications
- Small visual changes & minor bug fixes.

Mini trx

- The latest firmware version is: 1.21
- The latest FPGA version is: 1.11
- V1.21 Changes: Added EXT LTC (cont) mode. Screen refresh when scrolling through menu, to address occasional blank screen issue. NEEDS FPGA UPDATE ALSO

Mini rx

- The latest firmware version is: 1.21
- The latest FPGA version is: 1.11
- V1.21 Changes: Added EXT LTC (cont) mode. Screen refresh when scrolling through menu, to address occasional blank screen issue. NEEDS FPGA UPDATE ALSO

Mini tx

- The latest firmware version is: 5.03
- v5.03 Changes: Change ‘UK’ channel to ‘CE’. Change ‘US’ channel to ‘FC’.

wifimaster

- The latest firmware version is: 5.30
- The latest FPGA version is: 1.30
- TCB4b v5.30 Changes: Key Lock feature added.
- TCB4b v5.30 Changes: 14 Japan RF channels added.
- TCB4b v5.30 Changes: Auto power on when external power removed and re-applied (if unit was not intentionally turned off)
- TCB4b v5.30 Changes: WiFi Infrastructure mode automatic logon to an SSID of: TCBnet with a WPA2 Passphrase of: buddy123.
- TCB4b v5.30 Changes: More solid connection routines for connecting to WiFi routers for updating Firmware or Infrastructure use of multiple wifi master’s on the same network.
- TCB4b v5.30 Changes: WiFi menu mode to output T/C on UDP port 4200 for Softron MovieRecorder (Mac OS X).
- TCB4b v5.30 Changes: General bug fixes.

Instructions:

- Download the updater software package for the: pulse, SyncBac PRO,: wave, mini trx+, mini trx and mini rx.
- Choose run for the download when prompted.
- If notified of any security risks, choose Actions and select ‘Run anyway‘ (Ignore any download security warnings).
- Accept terms of the License Agreement, click ‘Yes‘.
- Wait for all Windows components to install. This is a short process, once it is complete you are ready to proceed.
- Before you open the Updater application, please ensure your device is connected to the internet. This will allow the updater app to collect the most up to date version of the Firmware, FPGA and Web view files, before you progress to update your units.
- Connect your unit to your computer via a USB cable
- Upon launch, the Updater app will automatically update your unit to the latest version

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.

If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.

That being said, if you consider applying this release and have made sure you're properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.

Check with our website as often as possible in order to be up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers