TRENDnet TPE-1620WS v2.0R Switch Firmware 1.00.10 Download

Posted at December 23, 2024 by PCI-DB Team

TRENDnet TPE-1620WS v2.0R Switch Firmware 1.00.10 Description

NOTE

:

It is highly recommended to clear your web browser cache after upgrading due to updates in GUI layout

Firmware Upgrade Procedure

- Save the downloaded firmware file (.zip) to your PC
- Right click on the downloaded file and select Extract All or Extract Here option
- Make sure to remember the location where the extracted file will be saved.
- Log into to the router’s configuration page
- Navigate to the Tools section, click on Firmware Upgrade and select the via HTTP option.
- Click Browse and select firmware file (.hex) from the extracted files and click the Apply button to start the firmware upgrade process.
- Wait until the firmware upload has completed and the device reboots.
- The firmware upgrade is complete. 

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn't much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn't either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don't interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TRENDnet Drivers