Posted at November 17, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Grandstream GXP2135 IP Phone Firmware 1.0.9.18 Beta |
---|---|
Category | Voip Voice Over Ip |
Manufacturer | Grandstream |
File Size | 41 MB |
Supported OS | OS Independent |
- For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware version or lower is not supported.
- For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version or lower is not supported.
- This release adds Predictive Dialing feature which included a required internal change. If you downgrade from 1.0.9.18 to 1.0.7.25 you will lose the call history.
- Added Support for "Off-Hook Auto Dial Delay" [OFF-HOOK AUTO DIAL DELAY]
- Added Keypad support for factory reset [FACTORY RESET VIA KEYPAD]
- Added “Call Completion” feature [CALL COMPLETION SERVICE]
- Added Support to enable keypad lock with MPK/VPK/Softkey by one press [KEYPAD LOCK]
- Added Account swapping feature[ACCOUNT SWAPPING]
- Added Dialplan new web UI interface [DIALPLAN INTERFACE]
- Added MPK mode for multicast listening list [MULTICAST LISTENING ADDRESS LIST]
- Added New MPK mode: forward, DND, redial, SMS, paging [NEW MPK MODE FOR FORWARD, DND, REDIAL, SMS, PAGING ]
- Added Shortcut HOLD+UP to factory functions page [SHORTCUT (HOLD+UP) TO FACTORY FUNCTIONS SETTING]
- Added Option Transfer Mode via VPK [TRANSFER MODE VIA VPK]
- Added Action URI feature support [ACTION URI SUPPORT]
- Added Support for Cisco Discovery Protocol (CDP) [SUPPORT FOR CISCO DISCOVERY PROTOCOL (CDP)]
- Added Support of wav playback feature and custom ringtone for individual Contact [CUSTOM RINGTONE FOR INDIVIDUAL CONTACT]
- Added LCD menu for weather configuration [WEATHER CONFIGURATION FROM LCD MENU]
- Add Support to export/import user configuration [SUPPORT TO DOWNLOAD USER CONFIGURATION]
- Added Search bar can search with alphabet characters and lookup first/last name and UserID fields [SEARCH BAR SUPPORT]
- Added “Virtual Voice mail” feature [VIRTUAL VOICE MAIL]
- Added New feature to record user configuration; privilege checking
- Added UCM Call Center Feature[UCM CALL CENTER FEATURE]
- Added Support to show status of user space [USER SPACE STATUS]
- Added Support for error message popup [ERROR MESSAGE SUPPORT ON LCD SCREEN]
- Added Support for date and time display on screensaver [DATE AND TIME DISPLAY ON SCREENSAVER]
- Fixed "Disable DHCP Option 43 and Option 66 to Override Server" didn‟t work
- Fixed there was no sound in the call after changing to the iLBC payload type
- Fixed VPK cannot provision successfully if configuration file has P values requiring reboot
- Fixed Conference participants played noise after SRTP conference host hangs up
- Fixed Eventlist BLF didn't auto provision on LCD after disconnecting EXT board
- Fixed BLF stopped working after a period
- Fixed Affinity App line label displayed conference icon in one-way call
- Fixed Broadsoft XSI directories didn‟t send request with authentication after receiving the message 401
- Fixed ReConf Softkey disappeared when pressing Up/Down key on call interface under account mode
- Fixed Call screen displayed CONF icon in one-way call
- Fixed 'Hide Dialing Password' didn't work after holding/resuming call
- Fixed Device worked abnormally if connecting with Bluetooth headset during ringing status
- Fixed Device didn't respond when pressing shared line key under account mode
- Fixed Audio mode was incorrect when enabling Live DialPad and connecting Bluetooth
- Fixed Password length of Hide Dialing Password had no limit value
- Fixed Bluetooth toggle Softkey displayed wrong in on-hook dialing page
- Fixed Syslog messages didn‟t include MAC address and firmware version
- Fixed Device worked abnormally after dialing favorite contacts in Quick IP Call page
- Fixed USB screensaver source worked abnormally
- Fixed Device sent duplicate outbound notification and Action URL message.
- Fixed LCD displayed extra Broadsoft center icon after reboot
- Fixed Device acted abnormally when using Favorite contact to predictive call
- Fixed Device didn't display far end's picture if it was added to local phonebook
- Fixed Call history duration on web displayed abnormally
- Fixed Device line LED worked abnormally in account mode
- Fixed Device couldn‟t access network
- Fixed Firmware upgrade method still could be changed when enabling Provider Lock
- Fixed Backspace Softkey in Broadsoft conference add page didn't work
- Fixed Device worked abnormally if holding/resuming call after dismissing incoming call
- Fixed Device‟s issues related to IIM&P with Broadsoft UC-One
- Fixed Device‟s issues related to XSI with Broadsoft UC-One
- Fixed Device‟s issues related to Broadworks Anywhere with Broadsoft UC-One
- Fixed The input box displayed abnormally after configured multiple characters in LDAP Directory
- Fixed Device LCD displayed abnormally after switching Broadsoft XSI Authentication type
- Fixed Device worked abnormally if modified Menu mode with Locked in audio loopback page
- Fixed Device LCD displayed abnormally in More menu key after entering number in Attended Transfer
- Fixed LCD stayed in Cancel ForwardAll page after pressing CancelFwd Softkey
- Fixed Device failed to download Language file when options "config via" and "firmware upgrade via" are set to use different protocols
- Fixed Device played dial tip tone in idle state after CancelFwd
- Fixed The extension board backlight was off after switching Sync Backlight with LCD option
- Fixed Device worked abnormally if there was an incoming call in audio loopback mode after setting ForwardAll
- Fixed Accounts' contacts were cleared after Delete All contacts in Affinity App
- Fixed LCD warning box displayed incomplete when performing record via USB but not connecting to a USB
- Fixed History Softkey and missed call records display abnormally in DND status when disabling the call log
- Fixed Allow Remote Control Popup Window didn‟t pop up again after time out or hide
- Fixed Device couldn't obtain network if 802.1p was configured in DHCP VLAN mode
- Fixed On-Hook Dialing window disappeared when there was an incoming call
- Fixed Unread missed call log was not synchronized with Affinity app
- Removed Default image on the overview call screen
- Split call recording file into 2 channel files
- Fixed Device worked abnormally after provisioning a config file in a call
- Fixed Device switched to speaker and generated noise while dialing when using Bluetooth headset
- Fixed Device with Line Key Sync enabled still handled CallFWD No Answer if there was incoming call from BS Hunt Group
- Fixed No audio upon answering multiple calls issue
- Fixed Speed Dial mode of VPK/MPK/EXT didn't work after configuring successfully
- Fixed Device played ring back tone instead of call waiting tone (CWT)
- Fixed DHCP Option 60 Vendor class identifier was being sending wrong after a factory reset
- Fixed Eventlist BLF only auto provisioned first VPK page upon reboot
- Fixed DeleteAll softeky didn't take effect on BS phonebook list interface
- Fixed Device couldn't get DHCP VLAN network segment IP after bootup
- Fixed the "Broadsoft Only" displayed incompletely on LCD
- Fixed Keypad Lock status on web page didn't synchronize with Keypad Lock VPK
- Fixed MPK/VPK configuration and display issue
- Fixed Broadsoft call log details displayed time in strange format
- Fixed there was no sound in G.722 handset call after enabling Ring For Call Waiting
- Fixed Device failed to download phonebook after setting server path to a domain name address
- Fixed GXP2130v1 didn‟t answer multicast
- Fixed <PhotoUrl> tag was not working in the XML phonebook file
- Fixed Pressing Bluetooth headset key couldn't end current call when there was an incoming call
- Fixed audio worked abnormally after pressing BTOff/BTon Softkey when there was an incoming call
- Fixed No audio for incoming multicast paging with codecs other than PCMU issue
- Fixed Multicast paging call displayed PCMU codec even if using a different codec
- Fixed Device worked abnormally after loging in with the Public Mode
- Fixed DHCP inform didn‟t include vendor class identifier
- Fixed Call history info displayed wrong after call was being transferred
- Fixed Device worked abnormally after answering call before performing re-register
- Fixed Discrepancies issue with Multicast Codec Defined at the Sender Side
- Fixed Device GUI freezed after a weekend of no use
- Fixed Device failed to send call after two minutes of idle time when DUT was connected to a BlueTooth HeadSet
- Fixed Device didn't parse and process presence status in UCM presence NOTIFY
- Fixed Password displayed abnormally on External Service page
- Fixed Broadsoft Phonebook only showed 50 contacts
- Fixed No key Entry Timeout didn't keep default value after factory reset
- Fixed Device freezed after disconnecting syslog server
- Fixed Softkeys didn't work after rejecting one of multiple incoming calls
- Fixed Domain name with underscore couldn‟t be saved
- Fixed Predictive dialing was not working when local phonebook contained German contact with "ä" or "Ä" or "ß"
- Fixed One-way audio issue when resuming a call on hold
Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.
One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.
Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.
Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don't launch standalone update packages.
Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.
If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Voip Voice Over Ip File Size: 72.2 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.7 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.6 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.6 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.6 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.7 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 72.2 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.6 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.7 MB OS Independent
Install DriverDevice Type: Voip Voice Over Ip File Size: 78.7 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.