HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.10 Download

Posted at December 18, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.10
Category	Firmware
Manufacturer	HP
File Size	9.2 MB
Supported OS	Windows 2008

HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.10 Description

Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The following issues are resolved in this firmware version:

- Fixed an issue where updating iLO 4 firmware could stay at 1% and not complete correctly
- Fixed issue in which fan speed/airflow impedance occurs in certain situations.
- Updated the Factory_Defaults.xml script to include clearing the iLO and IML logs.
- Fixed an issue in which the server would auto power-on unexpectedly when iLO defaults were set using RIBCL.
- The iLO web interface and XML now show N/A for Total Memory Size, Operating Frequency, and Operating Voltage for empty processor sockets.
- Updated SET_HOST_APO.XML to use iLO user permissions.
- Changes to boot order in the iLO web interface and XML scripts now require the Virtual Power and Reset permission.
- Fixed Get_All_Languages.xml to work with CPQLOCFG.
- Fixed an issue where the iLO web interface displays the wrong message for an invalid SID.
- Fixed an issue where Clear_AHS_Data.xml will not execute successfully when AHS is disabled through the iLO web interface.
- The iLO Event Log now logs the name of the user that ran Clear_AHS_Data.XML.
- Fixed the Clear_AHS_Data.xml informational message.
- Removed unrelated VSP messages when running Mod_VSP_Flow_Control.
- Fixed the Set_Server_Name.xml log entry in the iLO Event Log.
- Fixed synchronization issues with the Power Regulator Values in iLO web interface and XML scripts.
- Fixed Get_Network.XML to display correct network information when the iLO 4 configured link is set to Auto.
- Fixed invalid XML response for Get_All_Languages.xml and Get_Language.xml.
- Fixed the Get_EmHealth.xml Storage Controller label.
- Fixed the IRC playback video when the server is powered off.
- Fixed IRC intermittent hang when un-mounting virtual media during a server reboot.
- Fixed the issue that caused an SSH session to disconnect when the IRC Trust Setting is changed.
- Fixed an issue that caused the .NET IRC to prompt for user credentials when started from the iLO web interface.
- Fixed an issue that caused the numeric keypad to work incorrectly in some situations.
- Fixed intermittent Unknown status for System Health, Server Power and UID in the iLO web interface Overview page.
- Fixed an issue that caused a DHCP supplied time zone not to be applied to the time iLO obtained from an SNTP server.
- Fixed a temporary loss of communication with Smart Array firmware which could lead to iLO noting a critical storage condition.
- Fixed an issue in which the server remains to be powered off when issuing a shutdown command (f12 > F2) using ESXi 5.0 U1.
- Fixed intermittent communication issues between iLO and a Smart Array Controller.
- Fixed the iLO web interface System Information page to display correct fan speed and temperatures.
- Various SNMP performance enhancements.
- Reworded the event log message to better identify when non-iLO firmware is flashed.
- Added controlled stepping of fan speed to avoid large fan speed changes that could cause fan failures.

This version adds support for the following features and enhancements:

- Support for HP Insight Remote Support 7.0 and later.
- Support for Location Discovery Services (ML and DL servers only).
- Support for configurable Remote Console hot keys.
- Integrated Management Log enhancements (iLO web interface): Added the ability to change the status of Critical or Caution events to Repaired. Added the ability to add a Maintenance Note to the IML log.
- Added logging for some Smart Array storage events.
- Added a customizable login security banner.
- Added more defined SNMP traps related to the server power state.
- Changed the handling of cache modules in order to not report an error for normal conditions such as cache recharging or logical drive expansion.
- Improved iLO Event Log message when non-iLO firmware is flashed.
- Added CLI performance improvements.
- Added CLI support for adding and removing SSH keys.
- Added manual_ilo_reset to the CLI, which allows network changes without an immediate reset.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related HP Drivers