HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.30 Download

Posted at May 6, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.30
Category	Firmware
Manufacturer	HP
File Size	10.8 MB
Supported OS	Windows 2008 ,Windows Server 2012

HP ProLiant MicroServer Gen8 iLO 4 Firmware 1.30 Description

Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The following issues are resolved in this firmware version:

- A possible security vulnerability related to SSRT101250 existed.
- The Integrated Remote Console (IRC) playback video could stop responding after recording.
- An incorrect entry was logged to the iLO Event Log when the IRC was launched to join a Shared Remote Console session.
- The iLO firmware replaced the server Real Time Clock (RTC) time with the iLO Network Time Protocol (NTP) time on every server reboot. The RTC is now set with the NTP time only when the server is plugged in and returns from an unpowered state.
- No SNMP alert was logged in HP SIM on failed iLO login attempts.
- The JAVA Integrated Remote console (JIRC) could not launch with HP SIM Single Sign On (SSO).
- The iLO SSH Server disconnected sessions during re-key operations.
- When importing new HP SSO certificates, a “Certificate Could Not Be Stored” error might occur.
- The Integrated Remote Console (IRC) might not be able to play a Pre-failure video downloaded from a web server.
- Mismatched Power Supply entries in the Integrated Management Log (IML) were not repaired after the correct power supply was installed.
- The Event log failed to display the user name when Lock_Config was enabled.
- No XML Logout iLO Event Log entry is recorded when a user logged out via HPONCFG.
- No iLO Event Log entries are recorded when IPMI/DCMI is set to Enabled or Disabled by using Mod_Global_Settings.xml.
- No iLO Event Log entries are recorded when Directory settings are modified through the CLI and XML scripts.
- No CLI option is provided to change the SNMP port and the SNMP trap port.
- The Power-On Delay cannot be set to Minimum Delay or Random up to 120 seconds on the Server Power page.

This version adds support for the following features and enhancements:

- System ROM, Chassis Manager, CPLD, and Power Management Controller firmware can be updated in the iLO web interface and via RIBCL scripts.
- IPv6 network communications (dedicated network connection only). In addition to the features supported in iLO 4 1.2x, the following features are supported:
- RIBCL/XML scripting
- SNMPv3
- Additional IPv6 functionality was added to the iLO utilities.
- The following Server Power-On Delay options are available: 15, 30, 45, and 60 seconds.
- RIBCL can be used with Single Sign-On (SSO).
- New web server with improved performance and reliability.
- New SSH server with improved performance and reliability.
- The System Information > Memory page displays the HP part number for DIMMs.
- The supported size for Encoded Kerberos tickets increased to 16 KB.
- SNMP trap 9001 covers all server reset cases instead of only cases in which iLO governs the reset.
- SNMP Traps are sent if communication between iLO and Insight Remote Support or iLO and Insight Online fails.
- Improved download performance for the Active Health System log.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related HP Drivers