TP-Link TL-WA801ND v4 Access Point Firmware 160913 Download

Posted at February 22, 2025 by PCI-DB Team

TP-Link TL-WA801ND v4 Access Point Firmware 160913 Description

Notices for upgrading:

- Please verify the firmware version is corresponded to your hardware version. Wrong firmware upgrading may damage your device and void the warranty.
- After you download the firmware, please use unzip tools to extract the firmware file to a folder on your computer;
- It’s recommended to upgrade the firmware via Ethernet cable connection but not wireless connection;
- Internet Explorer (IE) is recommended when upgrade the firmware;
- Do NOT turn off the power or unplug the Ethernet cable during upgrade process.

Steps for Upgrading:

- Connect your computer to the Ethernet port of the device by Ethernet cable. Make sure your network card is set to DHCP.
- Open a web browser (such as Internet Explorer, Firefox) and input 192.168.0.254 into the address bar, then press Enter.
- Type in the Username and Password (both admin by default) and click Login.
- Go to Advanced->System Tools->Firmware Upgrade, click Browse button to choose the firmware file you have unzipped before and click Upgrade.
- The device will reboot automatically after upgrading successfully, please wait for 2~3 minutes. 

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers