ASRock K8Upgrade-NF3 NVIDIA All in 1 Driver 6.39 for XP64 Download

Posted at November 26, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ASRock K8Upgrade-NF3 NVIDIA All in 1 Driver 6.39 for XP64
Category	Motherboard
Manufacturer	Others
File Size	37.5 MB
Supported OS	Windows XP 64 bit

ASRock K8Upgrade-NF3 NVIDIA All in 1 Driver 6.39 for XP64 Description

CPU:
- Socket 754 for AMD Athlon 64 and Sempron processor
- Supports Hyper-Transport Technology
- Supports AMD Cool 'n' Quiet Technology

Chipset:
- Single Chip: NVIDIA nForce3 250

Memory:
- 2 x DDR DIMM slots
- Supports DDR400/333/266 non-ECC, un-buffered memory
- Max. capacity of system memory: 2GB

BIOS:
- 2Mb AMI BIOS with ACPI, SM BIOS 3.0, PnP

Audio:
- Realtek ALC850 8channel AC'97 audio codec

LAN:
- Realtek RTL8201CL 10/100 Ethernet LAN PHY
- 802.3u, WOL supported

Slots:
- ASRock Future CPU Port (Yellow-colored): Flexible Socket 939 / Socket AM2 upgrade interface for ASRock 939CPU Board and AM2 CPU Board (optional)
- 1x AGP8X/4X slot , 1.5V
- 4 x PCI slots

Connector:
- 2 x SATA 1.5Gb/s connectors (supports RAID,0,1,JBOD)
- 2 x ATA 133/100/66 IDE connectors (supports 4 x IDE devices)
- 1 x Floppy connector
- CPU/Chassis FAN connectors
- 20 pin ATX power connector
- 4 pin ATX 12V power connector
- Power/IDE LED connector
- CD audio in header
- Front panel audio connector
- 2 x USB 2.0 port pin headers (to support extra 4 USB 2.0 ports)
- 1 x Game/MIDI port pin header

ASRock 8CH I/O:
- 4 x USB2.0 ports
- 1 x RJ45 LAN port
- 1 x Serial port (COM1)
- 1 x PS2 Keyboard connector
- 1 x PS2 Mouse connectors
- 1 x Parallel port (LPT1)
- 2 x Audio ports to support 8 Ch Audio ( Line In/Out, Mic In)

Hybrid Booster:
- CPU Frequency Stepless control
- CPU Vcore Adjustment
- AGP/PCI frequency control
- ASRock U-COP
- Boot Failure Guard (B.F.G)
- Untied Overclocking : FSB enjoys better margin due to fixed AGP/PCI buses

Support CD:
- Drivers, Utilities, AntiVirus Software
- SATA driver and utility

Accessories:
- Quick Installation Guide, Support CD, I/O shield
- Floppy/ATA 133cables
- 1 x SATA Data Cable (optional)
- 1 x SATA 1-to-1 Power Cable (optional)

Hardware Monitor:
- CPU Temperature Sensing
- Motherboard Temperature Sensing
- CPU Fan Tachometer
- Chassis Fan Tachometer
- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

Form Factor:
- ATX, 305mm x 191mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers