TP-Link TL-WA801ND V2 Access Point Firmware 140425 Download

Posted at December 25, 2024 by PCI-DB Team

TP-Link TL-WA801ND V2 Access Point Firmware 140425 Description

Changes:

- Improved security mechanism.
- Added the numbers of maximum wireless clients.
- Fixed the compatibility problem with Samsung TV.

Notices for upgrading:

- Please verify the firmware version is corresponded to your hardware version. Wrong firmware upgrading may damage your device and void the warranty.
- After you download the firmware, please use unzip tools to extract the firmware file to a folder on your computer;
- It’s recommended to upgrade the firmware via Ethernet cable connection but not wireless connection;
- Internet Explorer (IE) is recommended when upgrade the firmware;
- Do NOT turn off the power or unplug the Ethernet cable during upgrade process.

Steps for Upgrading:

- Connect your computer to the Ethernet port of the device by Ethernet cable. Make sure your network card is set to DHCP.
- Open a web browser (such as Internet Explorer, Firefox) and input 192.168.0.254 into the address bar, then press Enter.
- Type in the Username and Password (both admin by default) and click Login.
- Go to Advanced->System Tools->Firmware Upgrade, click Browse button to choose the firmware file you have unzipped before and click Upgrade.
- The device will reboot automatically after upgrading successfully, please wait for 2~3 minutes.

About Access Point Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers