Posted at November 22, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | TRENDnet TPL-310AP v2.0R Access Point Firmware 1.61 |
---|---|
Category | Router Switch Access Point |
Manufacturer | TRENDnet |
File Size | 5.8 MB |
Supported OS | OS Independent |
- Save the zipped firmware file (.zip) to your PC
- Extract the .zip file to your PC.
- Go to Access Point’s configuration page (default IP is HU192.168.10.100UH)
- In the left-hand panel, click on Upgrade Firmware.
- Click Browse and navigate to the unzipped folder with the firmware file (.bin) and select it.
- Click the Upload button
- Wait until the firmware upload completed and the device reboot
- Important! Do not turn off the device or press the reset button while this procedure is in progress.
If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.
Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it's anything but that.
It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.
With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don't miss a single new release.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Network Card File Size: 2.3 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverDevice Type: Network Card File Size: 20 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverDevice Type: Network Card File Size: 2.8 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverDevice Type: Firmware File Size: 957 KB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Network Card File Size: 722 KB Windows 2K ,Windows XP
Install DriverDevice Type: Network Card File Size: 2.6 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverDevice Type: Firmware File Size: 2 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Firmware File Size: 1.6 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Firmware File Size: 5.5 MB OS Independent
Install DriverDevice Type: Network Card File Size: 2.9 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.