ASRock K7Upgrade-880 VIA SATA RAID Preinstall Driver 3.00b Download

Posted at December 19, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ASRock K7Upgrade-880 VIA SATA RAID Preinstall Driver 3.00b
Category	Motherboard
Manufacturer	Others
File Size	190 KB
Supported OS	Windows 2K ,Windows XP

ASRock K7Upgrade-880 VIA SATA RAID Preinstall Driver 3.00b Description

CPU:
- Socket A (462) for AMD Athlon XP/Athlon/Duron/Sempron processor
- FSB 400/333/266 MHz

Chipset:
- Northbridge: VIA KT880
- Southbridge: VIA 8237

Memory:
- Dual Channel DDR memory technology
- Supports DDR400/333/266 non-ECC, un-buffered memory
- DIMM slots: 4
- Max. capacity of system memory: 4GB*

*Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows XP.

BIOS:
- 4Mb AMI BIOS with ACPI, SM BIOS 3.0, PnP
Audio:
- CMedia CMI9761 6 channel AC'97 audio codec

LAN:
- VIA 6103 10/100 Ethernet LAN PHY
- 802.3u, WOL supported

Slots:
- ASRock K8 Bridge Port (Orange-colored): Flexible Socket754 upgrade interface for ASRock 754Bridge card(optional)
- AGP1: AGP8X slot for socketA(462)
- AGP2: AGP8X slot for socket754
- 3 x PCI slots( PCI 2.3 compliance)

Connector:
- 2 x SeialATA 1.5Gb/s connectors supports RAID,0,1,JBOD, SATA HDD_Hotplug
- 2 x ATA 133/100/66 IDE connectors (supports 4 x IDE devices)
- 1 x Floppy connector
- CPU/Chassis FAN connectors
- 20 pin ATX power connector
- 4 pin +12V ATX power connector
- IDE LED connector
- CD/AUX audio in header
- Front panel audio connector
- 2 x USB 2.0 port pin header
- 1 x Game/MIDI port pin header

ASRock I/O Plus:
- 6 x USB2.0 ports
- 1 x RJ45 LAN port
- 1 x Serial port (COM1)
- 1 x PS2 Keyboard connector
- 1 x PS2 Mouse connectors
- 1 x Parallel port (LPT1)
- 1 x Audio ports ( Line In/Out, Mic In)

Hybrid Booster:
- CPU Frequency Stepless control
- CPU Multiplier
- CPU Vcore Adjustment
- ASRock U-COP
- Boot Failure Guard (B.F.G)

Support CD:
- Drivers, Utilities, Anti Virus Software, ASRock PC DIY Demo
- SATA driver and utility

Accessories:
- Quick Installation Guide, Support CD, I/O shield
- Floppy/ATA 100 Cables
- 1 x SerialATA Data Cable
- 1 x SerialATA 1-to-1 Power Cable

Form Factor:
- ATX, 305mm x 216mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers