MOBOTIX M12 Network Camera Firmware 3.5.5.10 Download

Posted at April 28, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	MOBOTIX M12 Network Camera Firmware 3.5.5.10
Category	Router Switch Access Point
Manufacturer	MOBOTIX
File Size	11.1 MB
Supported OS	OS Independent

MOBOTIX M12 Network Camera Firmware 3.5.5.10 Description

Fixes:

- File server storage on large NAS systems. When using NAS systems with a capacity of more than 4 Terabytes, the file system statistics showed wrong values. In such a case, the Event List dialog of the camera player contained empty cells in the Date & Time and Events columns. In addition, you can now the maximum storage size of the camera to values of more than 4 Terabytes.
- Improved protection against Cross-Site Scripting. The camera now has improved protection against inserting an executing JavaScript code when calling the camera help (XSS = Cross-Site Scripting).
- Camera reboot after connection problems with CIFS file servers. When experiencing connection problems to a CIFS file server, it was sometimes impossible to execute automatic or manual reboots of the camera. In order to reboot the camera, it was necessary to briefly disconnect its power supply.
- Event recording to Flash devices. When recording events on the internal SD card of the camera, faulty time information of the stored files sometimes resulted in missing events.
- Improved handling when writing the .erdinfo file. The handling of errors resulting from updating the .erdinfo file on a file server has been improved in such a way that the camera software prevents subsequent errors and that updating the file works properly again.
- FTP file transfer and Lux trigger value. Automatically stopping FTP file transfers when illumination dropped below the specified Lux value did not work any more. Image Sharpness Using Quick Controls
- When using the web browser, it was not possible to adjust image sharpness by means of the camera's Quick Controls.
- Defining windows using the mouse. Using the mouse to graphically define windows (e.g., video motion detection, exposure windows) on a Firefox web browser ([Shift]-Click/Click) did not work any more.
- MPL uploads on Chrome and Safari web browsers. If wass not possible to use Chrome and Safari web browsers to upload MPL files. It was thus impossible to use these browsers to update the camera software.
- Hardware options in the "Web" model variants. When opening the Admin Menu > Manage Hardware Expansions dialog of "Web" model variant, the camera offered to connect an ExtIO and a USB hard disk, although this variant supports neither the signal inputs/outputs nor the USB interface.

Note:

- Caution: This software version has been officially released only for M12 cameras!

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related MOBOTIX Drivers