HP ProLiant MicroServer Gen8 Storage Tape Firmware 3.7.0.0 (B) Download

Posted at November 21, 2024 by PCI-DB Team

HP ProLiant MicroServer Gen8 Storage Tape Firmware 3.7.0.0 (B) Description

The fixes below are only applicable for the following firmware revisions and devices:

HP StoreEver LTO-6 Ultrium 6650 SAS Tape Drive
- Drive firmware version O39D
- Update recommendation Recommended
- Supersedes O2BD
- Corner-case situations resulted in Space/Locate 0x5090/0x5092 reporting errors.
- An assert reset was possible on a load when re-initializing the write/read channel adaption routines.
- Writing to partitioned tapes might result in 0x5092 errors being reported on subsequent reads.
- The Cartridge Memory update failed causing assert reset due to other internal firmware processes overflowing the queue.
- Firmware race condition might cause a multi-partitioned cartridge to be reported as having only a single partition.
- A firmware upgrade over the primary port, after loading a cleaning cartridge, will fail with an 0x1C2B error.

HP StoreEver LTO-6 Ultrium 6250 SAS Tape Drive

- Drive firmware version 338D
- Update recommendation Recommended
- Supersedes 32BD
- Corner-case situations resulted in Space/Locate 0x5090/0x5092 reporting errors.
- An assert reset was possible on a load when re-initializing the write/read channel adaption routines.
- Writing to partitioned tapes might result in 0x5092 errors being reported on subsequent reads.
- The Cartridge Memory update failed causing assert reset due to other internal firmware processes overflowing the queue.
- Firmware race condition might cause a multi-partitioned cartridge to be reported as having only a single partition.
- A firmware upgrade over the primary port, after loading a cleaning cartridge, will fail with an 0x1C2B error.

HP StoreEver LTO-5 Ultrium 3280 SAS Tape Drive

- Drive firmware version X64D
- Update recommendation Recommended
- Supersedes X5BD
- Space/Locate 0x5090/0x5092 reporting errors that resulted from corner-case situations.
- New tapes labelled by a drive containing an earlier firmware revision might get reported as a blank tape.
- The drive might become unresponsive during writing due to internal hardware power-on sequencing.
- Forcing writes to the physical EOT (End Of Tape) might result in the last wrap getting overwritten under corner case conditions.
- Writing to partitioned tapes might result in 0x5092 errors being reported on subsequent reads.
- Poor performance when connected to some 6Gb SAS HBAs.
- The Cartridge Memory update failed causing assert reset due to other internal firmware processes overflowing the queue.
- A Tape Alert flag 56 (0x38) was not being cleared when the issue was resolved.
- A Tape Alert 55 (0x37) error was not being triggered on a failure to thread the tape during a load.

HP StoreEver LTO-5 Ultrium 3000 SAS Tape Drive

- Drive firmware version Z64D
- Update recommendation Recommended
- Supersedes Z5AD
- Space/Locate 0x5090/0x5092 reporting errors that resulted from corner-case situations.
- New tapes labelled by a drive containing an earlier firmware revision might get reported as a blank tape.
- The drive might become unresponsive during writing due to internal hardware power-on sequencing.
- Forcing writes to the physical EOT (End Of Tape) might result in the last wrap getting overwritten under corner case conditions.
- Writing to partitioned tapes might result in 0x5092 errors being reported on subsequent reads.
- Poor performance when connected to some 6Gb SAS HBAs.
- The Cartridge Memory update failed causing assert reset due to other internal firmware processes overflowing the queue.
- A Tape Alert flag 56 (0x38) was not being cleared when the issue was resolved.
- A Tape Alert 55 (0x37) error was not being triggered on a failure to thread the tape during a load.

The enhancements below are only applicable for the following firmware revisions and devices:

HP StoreEver LTO-6 Ultrium 6650 SAS Tape Drive
- Drive firmware version O39D
- Update recommendation Recommended
- Supersedes O2BD
- Improved the internal drive logging.
- Added final checking of the calibrated Servo band position values to the servo band calibration routine.
- Enhanced the process for the drive to request a cleaning tape and report associated Tape Alerts if a 0x7519 write fault is encountered.
- Changed servo parameter to make the drive more robust to media servo issues

HP StoreEver LTO-6 Ultrium 6250 SAS Tape Drive

- Drive firmware version 338D
- Update recommendation Recommended
- Supersedes 32BD
- Improved the internal drive logging.
- Added final checking of the calibrated Servo band position values to the servo band calibration routine.
- Enhanced the process for the drive to request a cleaning tape and report associated Tape Alerts if a 0x7519 write fault is encountered.
- Changed servo parameter to make the drive more robust to media servo issues

HP StoreEver LTO-5 Ultrium 3280 SAS Tape Drive

- Drive firmware version X64D
- Update recommendation Recommended
- Supersedes X5BD
- New Functionality: Added "cached" READ ATTRIBUTE command support to allow Cartridge Memory data to be accessed after the tape has been unloaded.
- Enhanced the load rotation check to reduce unload failures.
- Improved spacing performance by eliminating an unnecessary reposition.
- Increased tape speed during space/locates to reduce occurrences of 0x5090/0x5092 errors.
- Added final checking of the calibrated Servo band position values to the servo band calibration routine.
- Improved the internal drive logging.

HP StoreEver LTO-5 Ultrium 3000 SAS Tape Drive

- Drive firmware version Z64D
- Update recommendation Recommended
- Supersedes Z5AD
- New Functionality: Added "cached" READ ATTRIBUTE command support to allow Cartridge Memory data to be accessed after the tape has been unloaded.
- Enhanced the load rotation check to reduce unload failures.
- Improved spacing performance by eliminating an unnecessary reposition.
- Increased tape speed during space/locates to reduce occurrences of 0x5090/0x5092 errors.
- Added final checking of the calibrated Servo band position values to the servo band calibration routine.
- Improved the internal drive logging.

HP DAT 160 SAS Tape Drive

- Drive Firmware Revision WSB8
- Firmware includes fixes which address the following issues:
- Fixed an issue that could cause SAS link resets when connected to certain HBAs
- Fixed some settings to prevent SAS controller time-outs
- Fixed the potential for command time-outs by accommodating HBA long Open Rejects.

HP DAT 72 SCSI Tape Drive

- Drive Firmware Revision WPBC
- Firmware includes fixes which address the following issues:
- Fixed a firmware issue where the drive would experience a bus reset from certain bus configuration commands if the drive was busy.

Added support for new operating systems:

- Microsoft Windows Server 2012
- Microsoft Windows 8 (32-bit)
- Microsoft Windows 8 (64-bit)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers