MOBOTIX M25M Network Camera Firmware 4.1.10.28 Download

Posted at November 27, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	MOBOTIX M25M Network Camera Firmware 4.1.10.28
Category	Scanner Digital Camera Webcam
Manufacturer	MOBOTIX
File Size	20.9 MB
Supported OS	OS Independent

MOBOTIX M25M Network Camera Firmware 4.1.10.28 Description

Fixes:

- Playback in MOBOTIX App in LoRes Mode. When playing back recorded MxPEG videos in the MOBOTIX App, the video sometimes showed tiles in LoRes mode.
- Registration of Sipgate Premium Account. Registering a Sipgate Premium account as VoIP provider did not work – this has been fixed. Note, however, that – although the SIP address (User Name and Domain fields in the camera configuration) has the form "[email protected]", you need to enter the corresponding proxy server (e.g., "proxy.live.sipgate.de").
- Text display using the ^Sx variables. When using image profiles, (e.g., for an FTP transfer) the displayed text of one of the ^Sx variables, which is reading input from a serial interface (e.g., a weather station), had been faulty.
- Time tables for recording on a door station. It was not possible on door stations to control continuous recording using one of the time tables (weekly schedules). In such a case, the continuous recording was running permanently.
- Pre-alarm created tiles. When recording MxPEG videos with long pre-alarm times (5 sec), the camera sometimes generated tiles at the beginning of the alarm on large images or images with high bandwidth requirements. This has been fixed for M15, T25M and Q25M models.

Note:

- This software version contains important enhancements and improvements. Before running the upgrade, you should be aware of the changes and the limitations of this version (see Known Limitations section below), since downgrading to older versions 4.0.4.x on T24M cameras is only possible with assistance from MOBOTIX Support. Make sure that you save the current camera configuration to the computer before running the upgrade.
- When upgrading the software, the camera automatically adjusts the camera configuration in several sections. Note that you cannot use such an adjusted and stored configuration on cameras with software releases lower than 4.1.x.
- After uploading a configuration file created by a camera software V3.x, make sure that you check the resulting configuration to ensure that it is functioning properly and adjust it, if required.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related MOBOTIX Drivers