Grandstream GXP1620 IP Phone Firmware 1.0.4.65 Beta Download

Posted at November 18, 2024 by PCI-DB Team

Grandstream GXP1620 IP Phone Firmware 1.0.4.65 Beta Description

IMPORTANT UPGRADING NOTE:

- Starting from firmware version 1.0.2.21, downgrading to version 1.0.2.4 or lower requires a matched protocol for upgrading and provisioning under webUIMaintenanceUpgrade and Provisionoption “Config Upgrade Via” and option “Firmware Upgrade Via”.
- For example, if you are using HTTP server to downgrade to 1.0.2.4, please configure both “Config Upgrade Via” and “Firmware Upgrade Via” to “HTTP”.
- Firmware version 1.0.4.50 supports new hardware revision. For GXP16xx that’s on new hardware version 2.2A, it cannot downgrade to firmware version lower than 1.0.4.50.
- Starting from 1.0.3.28 weather service is removed and no longer supported.

ENHANCEMENT:

- Added support of Syslog over TLS [SYSLOG OVER TLS]
- Added support of Provisioning "Trusted CA Certificates" [PROVISIONING “TRUST CA CERTIFICATE”]
- Added option to select the method for call display information [NEW OPTIONS FOR CALL DISPLAY INFORMATION]
- Added support to show GDS3710 OpenDoor softkey as long as remote number matches
- Added support to enable/disable IPv4/IPv6 [IPV4/IPV6 DISABLE/ENABLE SUPPORT]
- Upgraded OpenVPN version to 2.4.0
- Added GDS3710 Surveillance Action Key integration[GDS SURVEILLANCE ACTION KEY SUPPORT]

BUG FIX:

- Fixed In the LLDP environment, the IPV4 address is shown as 0.0.0.0
- Fixed OpenVPN doesn't work properly
- Fixed 802.1Q doesn't work
- Fixed GXP1628 crashes after entering DTMF digit 2 in meeting room
- Fixed Gateway address is not valid when setting static IP from LCD
- Fixed Web UI’s phonebook editor has one more option
- Fixed Password is displayed abnormally on External Device page
- Fixed Unable to add/edit contacts on the web
- Fixed Created contact on Web UI is not saved immediately
- Fixed Configuration is lost after restart
- Fixed Phone LCD does not display the correct failure SIP message when call fails
- Fixed BLF key pressing has no effect during active call
- Fixed DHCP inform does not include the Vendor class identifier
- Fixed Device crashes randomly with coredump generated
- Fixed No audio for incoming multicast paging with codecs other than PCMU
- Fixed Multicast paging call will always display PCMU codec even if using a different codec
- Fixed Listener’s Multicast Codec is defined by Account 1, instead of the Multicast Codec Setting
- Fixed Discrepancies with Multicast Codec Defined at the sender Side
- Fixed Audio loss when there is jump in RTP timestamp
- Fixed The DUT does not send SIP log
- Fixed DUT with Line Key Sync still handles CallFWD No Answer if there is incoming call from BS Hunt Group
- Fixed Loading Pvalues to certificate files in case files are not saved successfully after hard reboot.
- Fixed Trusted CA Certification web upload
- Fixed CA file is cleaned up after reboot
- Fixed high CPU use of syslogd in gxp1600

About VoIP Phone Updates:

Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.

One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.

Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.

Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don't launch standalone update packages.

Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.

If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Grandstream Drivers