Intel HNS2600KP Compute Module BIOS/Firmware 01.01.0022 Download

Posted at April 18, 2024 by PCI-DB Team

Intel HNS2600KP Compute Module BIOS/Firmware 01.01.0022 Description

Versions:

- System BIOS - R01.01.0022
- ME Firmware - 03.01.03.043
- BMC Firmware - 01.50.10802
- FRUSDR - 1.16

ME Changes:

- Flash from Grantley FW to Grantley-R FW could cause SPS reset.
- System unexpected shutdown with SPS FW exception error.
- ME FW changes P state value when no policy is active imapcting performance.
- C8h command power readings for CPU domain are invalid.

BMC Changes:

- 1504486292: [Grantley] Fake PS1 Power In event in SEL caused by miscommunication between BMC and PSU
- 1209210658: [Grantley] 1100W PSU Predictive failure message has been detected
- none: [Grantley] PSU downgrade issue happened in factory
- none: upgrade PSU FW 1100w to v51 using 1100ADU00201_S3_1_1_51.bin

FRUSDR Changes:

- Modified the cfg file to add EBCP SKU.
- Update SDR as per Kennedy Pass FSC Config Sheet Rev 2.2.xlsm

This download is valid for the products listed below:

- Intel Server Board S2600KPF
- Intel Server Board S2600KPT
- Intel Server Board S2600KPR
- Intel Compute Module HNS2600KP24R
- Intel Compute Module HNS2600KPF
- Intel Server Board S2600KPTR
- Intel Compute Module HNS2600KPR
- Intel Compute Module HNS2600KP24
- Intel Server Board S2600KP
- Intel Compute Module HNS2600KP
- Intel Server Board S2600KPFR
- Intel Compute Module HNS2600KPFR

System Firmware Update Package Usage instructions

This package can be updated using one of the following methods:
- Windows or Linux operating system using Intel One-boot Flash Update (OFU) V13.1 Build 13
- Windows Preboot Execution Environment (WinPE)

To update from Windows and Linux or operating systems using the Intel One Boot
- Flash Update Utility (OFU)

Use OFU to update system firmware by the following steps:
- Install OFU on Windows or Linux system
- Download the latest firmware update package from http://downloadcenter.intel.com/
- Unzip package to a folder
- Run the following command in Windows command line/Linux terminal window: <OFU install folder name>:flashupdt -u <package folder name>flashupdt.cfg

To update from Windows Preboot Execution Environment (WinPE)
The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:
- Boot server with customized WinPE CD
- Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization)

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

When it comes to applying a new version without taking into account the computer’s operating system, the most commonly used method to flash the BIOS is by creating a bootable USB or CD containing the update file, and running it from DOS.

Still, regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

In order to apply this package, it would be best if you carefully read and understand the instructions provided by your computer manufacturer, and perform the update only when you have completely familiarized yourself with the steps.

In addition to that, make sure you perform a system reboot after upgrading the firmware version in order to allow all changes to take effect properly.

That being said, if this release is compatible with all system characteristics, click the download button, and upgrade your firmware. Otherwise, check with our website as often as possible so that you find out when a compatible update becomes available.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers