MikroTik RouterOS SMIPS Firmware 6.38 RC 19 Download

Posted at November 23, 2024 by PCI-DB Team

MikroTik RouterOS SMIPS Firmware 6.38 RC 19 Description

Changes:

- snmp - added basic get and walk functionality "/tool snmp-[get|walk]";
- chr - fixed "/interface print";
- chr - fixed reboot;
- fastpath - fixed kernel failure when fastpath traffic goes into loop;
- fastpath - fixed rare crash;
- interface - changed loopback interface mtu to 1500;
- ipsec - added ability to specify static IP address at send-dns option (CLI only);
- ipsec - send xauth password without trailing null;
- led - fixed cAP 2nD stuck in dark mode all the time;
- lte - fixed Pantech UML296 support;
- package - show minimal supported RouterOS version under "/system resource" menu if it is specified;
- profiler - added ability to monitor cpu usage per core;
- resolver - ignore cache entries if specific server is used;
- ssh - fixed lost "/ip ssh" settings on upgrade from version older than 5.15;
- trafficgen - fixed potential crash when very big frame is generated;
- vlan - allow to add multiple vlans which name starts with same number and has same length;
- vlan - fixed CRS switch egress-vlan-tag export;
- winbox - added led settings menu;
- winbox - allow to run profiler from "/system resources" menu;
- winbox - fixed missing switch menu for mmips devices;
- winbox - properly show VHT basic and supported rates in CAPsMAN;
- wireless - added CRL checking for eap-tls;
- wireless - take in account channel width when returning supported channels;

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related MikroTik Drivers