HiMedia Q5 II Smart TV Box Firmware 1.0.5 Download

Posted at December 22, 2024 by PCI-DB Team

HiMedia Q5 II Smart TV Box Firmware 1.0.5 Description

Recovery Mode Update:

- Download the new firmware and place the firmware onto the ROOT directory of a USB drive.
- Plug the USB drive into an empty USB HOST on the smart tv box.
- With the smart tv box turned off,use a paper clip or tooth pick to press and hold the small pinhole restore button on the smart tv box.
- While pressing the restore button,turn on the smart tv box. Continue to hold the restore button for 5 more seconds,then release it.
- The restore mode will begin upgrading the firmware from the USB drive as below:
- Wait for the smart tv box to complete the firmware update. Please be patient as it may take around 5 minutes to complete.
- After upgrading, pls go to SETUP to check the firmware version.

How to upgrade from setup menu:

- Download the version according to your product Q5 update.zip
- put the "update.zip" into USB disk (Q2 use update_Q2.zip, Q4 use update_Q4.zip)
- goto setup--system upgrade, click "SDA" or SDB
- Q5 will reboot and entering the upgrade mode, there will be a ROBOT screen
- Wait for the smart tv box to complete the firmware update. Please be patient as it may take around 5 minutes to complete.
- Box will auto reboot after upgrade is finished

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related HiMedia Drivers