TP-Link M7350 v2 Mobile Wi-Fi Firmware 150525 Download

Posted at May 1, 2024 by PCI-DB Team

TP-Link M7350 v2 Mobile Wi-Fi Firmware 150525 Description

New Features/Enhancement：

1.Largely increase device service time.
2.Largely improved Phone UI function and webpage display.
3.Add IPv4/IPv6 dual-stack support.
4.Update ISP information in regions below:
Egypt, Thailand, Israel, Portugal, Denmark, Sweden, South Africa.
4.Optimized Wi-Fi performance and improved system stability.
5.Add anonymous access to SD sharing in Wi-Fi mode.
6.Removed the number limit when deleting the SMS.

Bug Fixed:

1.Fixed the bug that PIN is restrict to 4 numbers (Now 4-8 numbers).
2.Fixed the bug that when receive SMS send by M7350, the emoticon can’t be displayed on receiving end.
3.Fixed the bug that M7350 can't connect to Internet with Lyca Mobile SIM card in Portugal.

Update procedure

- Log into the TP-LINK device by typing http://192.168.0.1 in the address bar of the web browser (such as Internet Explorer, Firefox). The UserName and Password are both admin unless you have changed it before.
- Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
 - Click the Upgrade button. The device will reboot automatically after the upgrading has been f. Please wait about 3 minutes.
- Click Status, verify that the router’s firmware has been upgraded.
- It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tools->Factory Defaults, Click Restore Button.
- After restoring factory default, please login http://192.168.0.1 and re-enter the settings you have written down before upgrading.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers