Leica M10 Camera Firmware 1.7.4.0 Download

Posted at November 17, 2024 by PCI-DB Team

Leica M10 Camera Firmware 1.7.4.0 Description

Improvements of SD card compatibility

- Effective immediately a larger choice of SD cards is compatible with the Leica M10.
- With the last Firmware, certain SD cards were not recognized, or the complete write speed could not be used with the camera.
- The Leica M10 supports SDHC/SDXC cards from 1GB up to 512 GB. We recommend to use cards with write speed 80 MB/s or higher in order not to restrict the cameras performance. In single cases it can occur that the speed, stated by the cards manufacturers, differs from the effective read or write speed in the Leica M10.
- Use UHS I cards instead of UHS II. The M10 is compatible with UHS II cards, but does not use the full UHS II speed.
- Leica performs ongoing compatibility tests of the latest cards available in the market. We ask for your understanding that due to potential changes in production batches and software of SD cards as they are manufactured and brought to market, Leica cannot guarantee a 100% compatibility of the recommended cards.

Firmware Update Procedure:

- Recharge the battery to 100% and insert the battery into the camera.
- Download the new firmware file to your computer.
- Prepare the SD card for installation:
- Please make sure that the card contains at least 200 MB of free disk space.
- It is recommended to format the card inside the camera before continuing
- Download the new firmware file to your computer.
- Copy the firmware file to the root directory of the SD card.
- Eject the SD card properly from your computer.
- Insert the SD card into the camera and switch the camera on.
- Go to Main Menu / Camera Information / Camera Firmware
- Press “Yes” to confirm and start the process.
- Please confirm to save your current profiles to SD card before proceeding with the update.
- Wait until the update installation is completed.
- Restart the camera, do not eject the SD card.
- Please load your last profiles from SD card after the first startup.
- The update process is complete.

CAUTION:

- Please do not turn off your camera, or do not remove the SD Memory Card, do not remove the lens while updating your camera's firmware.
- DOING SO CAN CAUSE A SERIOUS DAMAGE TO YOUR CAMERA!
- When installing the new Firmware version, all user profiles will be deleted and need to be set again after the new firmware is installed. We recommend taking note of the specific settings before updating.
 - If the battery does not have sufficient charge, you will see a corresponding warning message.  

About Integrated Web Camera Updates:

Enabling your embedded web camera by installing appropriate software will allow your system to capture and send images through a computer network, and include support for various features that the webcam benefits from.

In addition to that, updating the software on your device can fix various problems that might be encountered during the product's lifetime, and improve existing features like image quality, or add support for new ones.

When it comes to the installation process, the steps are very simple, as each manufacturer tries to make them as easy as possible, so that every user can perform the update on their own – simply run the package and follow the on-screen instructions for a complete installation.

Therefore, if you consider applying this package, hit the download button, and install it on your computer. Moreover, constantly check with our website in order to make sure that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Leica Drivers