ECS G41T-M6 (V1.0) Atheros AR813x Ethernet Controller Driver 1.0.0.23 Download

Posted at December 19, 2024 by PCI-DB Team

ECS G41T-M6 (V1.0) Atheros AR813x Ethernet Controller Driver 1.0.0.23 Description

CPU 

LGA775 socket for Core2 Quad/Core2 Duo/ Pentium Dual Core/ Celeron Dual Core/ Celeron 400 series processors
LGA775 socket for latest Intel 45nm Multi-Core processors
FSB 1333/1066/800 MHz

CHIPSET

Intel G41 & ICH7
North Bridge: Intel G41
South Bridge: Intel ICH7

GRAPHICS

Integrated Intel Graphics Media Accelerator X4500 (GMA X4500)
Integrated DirectX 10 graphics processor
Share memory: up to 128MB

MEMORY

Dual-channel DDR3 memory architecture
2 x 240-pin DDR3 DIMM socket support up to 4GB

EXPANSION SLOT

1 x PCI Express x16 slot
2 x PCI Express x1 slots
1 x PCI slot

STORAGE

Support by Intel ICH7
 1 x Ultra DMA133/100/66 port
 4 x Serial ATAII 3.0Gb/s devices

AUDIO

VT 1705 6-Ch High Definition audio CODEC , ALC662/VT 1708 (optional)

LAN

Atheros AR8131 Gigabit Fast Ethernet Controller (AR8132 10/100 Lan optional)

REAR PANEL I/O

1 x PS/2 keyboard & PS/2 mouse connectors
1 x D-sub(VGA)
1 x DVI Port
1 x Parallel port (LPT)
1 x RJ45 LAN connector
1 x Audio port (Line-in, Line-out, Mic-in)
4 x USB 2.0 Ports

INTERNAL I/O CONNECTORS & HEADERS

1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
1 x 4-pin CPU_FAN connector
1 x 3-pin SYS_FAN connector
1 x IDE connector
1 x Speaker header
1 x Front panel header
1 x S/PDIF out header, 1 x CD-in header
1 x CLR COMS
4 x Serial ATA connectors
2 x USB 2.0 headers support additional 4 USB Ports

SYSTEM BIOS

AMI BIOS with 8Mb SPI Flash ROM
Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
Supports ACPI & DMI
Audio, LAN, can be disabled in BIOS
F11 hot key for boot up devices option
Support Page Up clear CMOS Hotkey

FORM FACTOR

Micro-ATX Size, 244mm*204mm

About Ethernet Driver:

Windows platforms generally apply a generic driver that allows motherboards to recognize the Ethernet component.

However, in order to make use of all network card (adapter) features, you must install a proper LAN driver that enables the hardware. This task enables systems to connect to a network, as well as collect all component characteristics such as manufacturer and chipset.

If you intend to update the driver version, know that this process can add support for new OSes, fix different compatibility problems, resolve related errors encountered during the product’s lifetime, as well as include various other changes.

When it comes to the actual installation procedure, we should note that most producers try to make it as easy as possible, so following the steps should be a breeze: just get the downloadable package, run the setup, and follow the on-screen instructions.

There is a chance that other OSes could also be suitable, but it is not advisable that you install this release on platforms other than the specified ones. Remember to perform a system reboot once done, to allow all changes to take effect properly.

Therefore, if you wish to apply this version, click on the download button and enable your network card. To stay up to speed with the latest updates, check back with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Atheros Drivers