Avaya 1692 IP Phone H.323 Firmware 1.4.0 Download

Posted at November 22, 2024 by PCI-DB Team

Avaya 1692 IP Phone H.323 Firmware 1.4.0 Description

Fixes:

- No audio path after CM reset while shuffling is enabled.
- 1692 phone sends GRQ to AGK list IP's in case of login attempt through unnamed registration Login Softkey.
- 1692 does not display the current active Gate keeper Address in SysInfo when it is registered to alternate Gate keeper.
- Sometimes even with extension availability phone is performing Unnamed Registration request.
- 1692 phone running software 1.3 or 1.31 losses audio path when the CM Server with processor Ethernet is interchanged.
- Newly logged in conference phone, 1692, does not show the administered button-labels.
- Mute key, Volume Up and Volume Down keys are not working in active call when CM Server with processor Ethernet is interchanged.
- Add support for GET filename command. VLANTEST 0 does not result in correct phone behavior. PROCSTAT and PROCPSWD features support in 1.4.
- 1692 phones reset the TCP connection
- Auto-icom server feature displayed wrongly on phone.
- Phone did not sent Release complete message in extension take over scenario.
- Phones are not rebooting when do busy out/release station/port using CM6.0
- Two Phones are getting register with same extension when unnamed registration is enabled on CM.
- 1692 ignores language settings in the station form and uses default.
- Phone is unable to go to unnamed registration state.
- 1692 phones are rebooting during calls in 1.32 software.
- 1692 phone does not follow load balancing.
- 1692 does not reboot via CM reset ip-stations command
- The station doesn't get the correct settings from the IP-NETWORKRegion (CoS settings)
- Phone screen does not display properly in ideal state after conference call with reset system 4.
- 1692 phones cannot be loaded with new software remotely.
- Phone is sending GRQ request and register back with CM again.
- 1692 Reregisters, drops call and unregister with TTI enabled.
- 1692 dropping active call.
- 1692 not trying the LSP in failover scenario.
- Remote reset of the 1692 results in the phone freezing.
- Phone displays the "No File server Address * to program" message even when it gets file servers IP from DHCP when do Mute Restart after Mute RESET.
- Server feature cursor does not get updated when remove few features from ACM while the phone is registered to it.
- Team button is displayed as {Null}, if logoff and login the phone after adding this server feature.
- Gatekeeper Request (GRQ) Issue-: Phone is not sending GRQ request in consistent time gap, when it goes in discovery mode.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Avaya Drivers