Avaya 9640 IP Phone Firmware 2.6.11 Download

Posted at December 22, 2024 by PCI-DB Team

Avaya 9640 IP Phone Firmware 2.6.11 Description

Fixes:

- When the Power Management error screen is displayed, it is not possible to log in because the Log In screen is not displayed.
- Outgoing call failure for calls which require authorization code.
- If a call is made to a deskphone and ended very quickly before answering, the History button will light but the call will not appear in the Call Log.
- A contact (originally added via SMGR) is added as a local contact. If that local contact is edited to add another work number, then the additional number is not saved.
- If a user has a very large number of contacts (200 or more), then there is a multiple-second delay when using the “Assign Speed Dial Entries” procedure.
- Phone has two bridge appearances of another extension. If a call is made on one bridge appearance, and then a second call is made on the other bridge appearance during a “transfer” operation, then cannot complete the transfer.
- Phone has two bridge appearances of two different extensions.
- If a call is made on one bridge appearance, and then a second call is made on the other bridge appearance during a “transfer” operation, then cannot complete the transfer.
- Phone has two call appearances. A call is made on one appearance, another call is made on the other appearance, and the user presses the “Conf” softkey. The “Join” softkey is not displayed.
- Phone incorrectly counts “+” as a digit when applying call display formatting rules
- Wrong Call Appearance state during a conference following a failover to a 3rd-party gateway.
- User cannot press the “Hold” soft-key and voice path is lost during a conference following a failover to a 3rd-party gateway.
- “Direct IP-IP Audio Connections?” and “Initial IP-IP Direct Media?” parameters are set to “y”, and phones are configured with RTCPMON parameter. When two phones are in a failover mode, pressing “Hold” on one phone drops the call on the second phone
- Incorrect public dial tone is generated when COUNTRY is set to ITALY during non-AST failover.
- If a list of HTTP file servers are configured via LLDP with the third (or later) being valid, and the SIP proxy is configured via a settings file, then the phone will reboot on the log-in screen before successfully retrieving the configuration file.
- When using TLS/SRTP, phones are incorrectly reporting encryption as “Unknown” instead of “AES”.
- After “CLEARing” a phone, and logging in, not all information is retrieved from PPM.
- Hold via 3rd-party Call Control is rejected if the phone is in a conference call.
- Commands for a conference bridge are intermittently not recognized.
- In-band DTMF commands are not recognized when Initial IP-IP Direct Media is turned on.
- When trying to “Restore Default Button Labels Screen”, pressing the “OK” button does not restore to the default labels.
- AUDIOENV settings are sometimes not applied until after a second reboot of the phone.
- Deskphone is incorrectly shown as “Available” (instead of “Away”) when the AES “Out of Office” timer expires.
- Deskphone is not able to authenticate successfully against Session Manager that has custom server certificates.
- Deskphone does not transfer software files using HTTPS when set to only use HTTPS. NOTE: Customers will still need to use http to upgrade to SIP

New Features:

- Following a failover from one Session Manager to the backup Session Manager, this enhancement reduces the time required to re-synchronize the state of the IP Deskphone with Communication Manager.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Avaya Drivers