MikroTik RouterOS SMIPS Firmware 6.38.7 Download

Posted at December 18, 2024 by PCI-DB Team

MikroTik RouterOS SMIPS Firmware 6.38.7 Description

What's new in 6.38.7:

- bridge - fixed BPDU rx/tx when “protocol-mode=none”;
- bridge - reverted bridge BPDU processing back to pre-v6.38 behaviour (v6.40 will have another separate VLAN-aware bridge implementation);
- 6to4 - fixed wrong IPv6 "link-local" address generation;
- arp - fixed "make-static";
- bonding - do not add bonding interface if "could not set MTU" error is received;
- console - fixed "/ip neighbor discovery" export;
- console - fixed unexpected console crash when using variables as functions;
- console - instead of true/false report yes/no as LCD enabled state;
- defconf - discard default configuration startup query with configuration change from Webfig;
- defconf - discard default configuration startup query with RouterOS upgrade;
- defconf - fixed default configuration generation when wireless package is disabled;
- defconf - fixed Groove 52 ac band settings;
- dns - made loading thousands of static entries faster;
- ethernet - fixed "loop-protect" on "master-port";
- ethernet - fixed rare switch chip hang (could cause port flapping);
- fetch - fixed download issue over HTTPS;
- firewall - do not allow to set "rate" value to 0 for "limit" parameter;
- firewall - fixed "address-list" entry "creation-time" adjustment to timezone;
- firewall - fixed "address-list" entry changing from IP to DNS and vice versa;
- firewall - fixed cosmetic "invalid" flag when item was disabled;
- ike1 - fixed crash on xauth message;
- ike2 - allow multiple child SA traffic selectors on re-key;
- ike2 - fixed last EAP authentication payload type;
- ike2 - fixed policy release during SA negotiation;
- ike2 - fixed RSA authentication without EAP;
- ike2 - fixed situation when traffic selector prefix was parsed incorrectly;
- ipsec - do not deduct policy src/dst address for tunnel policies;
- ipsec - fixed generated policy priority;
- ipsec - fixed peer "my-id" address reset;
- ipv6 - fixed address becoming invalid when interface was removed from bridge/mesh;
- led - fixed turning off LED when interface is lost;
- log - added missing "license limit exceeded" log entry;
- log - work on false CPU/RAM overclocked alarms;
- netinstall - fixed typos in Netinstall status messages;
- ntp - restart NTP client when it is stuck in error state;
- ppp - fixed IPv6 address receiving on PPP interface;
- pppoe - added warning on PPPoE client/server, if it is configured on slave interface;
- pppoe-server - fixed "one-session-per-host" issue where 2 simultaneous sessions were possible from the same host;
- queue - fixed queuing when at least one child queue has "default-small" and other/s is/are different (introduced in 6.35);
- quickset - fixed LTE "signal-strength" graphs;
- smb - fixed share path on devices with "/flash" directory;
- sniffer - fixed VLAN tags when sniffing all interfaces;
- snmp - added fan-speed OIDs in "/system health print oid";
- snmp - fixed limited walk;
- switch - fixed disabling of MAC learning on CRS1xx/CRS2xx;
- tile - fixed EoIP keepalive when tunnel is made over VLAN interface;
- traffic-flow - fixed IPFIX IPv6 data reporting;
- upnp - fixed firewall NAT rule update when external IP address changes;
- userman - allow "name-for-user" to be empty and not unique;
- userman - fixed rare GUI crash when User Manager files are not accessible;
- webfig - allow to enter frequency ranges in wireless “scan-list”;
- webfig - allow to select "default-encryption" profile on PPP tunnels;
- webfig - correctly specify routing filter prefix;
- webfig - do not allow to reorder items if table is sorted by some column;
- webfig - fixed "last-link-up" & "last-link-down" time information;
- webfig - fixed Bridge Filter properties display when there are more than one Filter available;
- webfig - show all available options under "Advanced Mode" for wireless interfaces;
- winbox - added "Flush" button under “unicast-fdb” menu;
- winbox - added "memory-scroll", "filter-cpu", "filter-ipv6-address", "filter-operation-between-entries" Sniffer parameters;
- winbox - added “protected-routerboard” parameters under RouterBOARD settings menu;
- winbox - allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
- winbox - do not allow Packet Sniffer "memory-limit" and "file-limit" lower than 10KiB;
- winbox - do not allow to open multiple same sub-menus at the same time;
- winbox - do not show "dpd-max-failures" on IKEv2;
- winbox - do not start Traffic Generator automatically when opening "Quick Start";
- winbox - fixed "Montly" typo to "Monthly" in Graphing menu;
- winbox - fixed firewall port selection with Winbox v2;
- winbox - fixed IPSec "mode-config" DNS settings;
- winbox - fixed issue when working IPSec policies were shown as invalid;
- winbox - fixed switch ACL Policer statistics;
- winbox - fixed typo in BGP advertisements menu Aggragator->Aggregator;
- winbox - hide "wps-mode" & "security-profile" in wireless nv2 mode;
- winbox - properly show "dhcp-server" warnings;
- winbox - removed spare values from "loop-protect" setting for EoIPv6 tunnels;
- winbox - removed unnecessary "/system health" menu on "hAP ac lite" and “RB450”;
- winbox - show "A" flag for IPSec policies;
- wireless - reduced load on CPU for high speed wireless links;

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related MikroTik Drivers