ECS NFORCE9M-A NVIDIA SATA/IDE Driver 11.1.0.30 for Vista/Win7 Download

Posted at November 21, 2024 by PCI-DB Team

ECS NFORCE9M-A NVIDIA SATA/IDE Driver 11.1.0.30 for Vista/Win7 Description

CPU 

AMD PhenomII / Phenom processor (Socket AM2+)
AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
High-performance HyperTransport 3.0 CPU Interface
Support transfer rate up to 5200 mega-transfers per second
Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
AM3 Ready

CHIPSET

NVIDIA GeForce 8 Series

GRAPHICS

Support NVIDIA GeForce Boost for improved gaming performance with NVIDIA GPU

MEMORY

Dual-channel DDR2 1066 memory architecture
4 x 240-pin DDR2 DIMM socket support up to 32GB*
Support DDR2 1066/800/667/533/400 DDR2 SDRAM *
* (Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 8GB)
*(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)

EXPANSION SLOT

1 x PCI Express x16 Gen2.0 slot (Support Hybrid SLI)
2 x PCI Express X 1 Gen1.1 slot
3 x PCI slots

STORAGE

Support by NVIDIA GeForce8100
2 x Ultra DMA133/100/66 devices
5 x Serial ATA 3.0Gb/s devices
RAID0, RAID1, RAID0+1, RAID5 configuration

AUDIO

IDT 92HD202 6-channel audio ( CO-lay 92HD206)
Compliant with 6ch HD audio specification

LAN

Realtek RTL8111 Gigabit Fast Ethernet Controller (Co-lay RTL8101E)

REAR PANEL I/O

1 x PS/2 keyboard & PS/2 mouse connectors
6 x USB ports
1 x Ethernet Port
1 x Audio port (Line-in, Line-out, Mic-in)

INTERNAL I/O CONNECTORS & HEADERS

1 x 24-pin ATX Power Supply connector
1 x 4-pin 12V Connector
1 x 4pin CPU_FAN connectors
1 x 3-pin SYS_FAN connector
1 x IDE connector
1 x FDD connector
5 x Serial ATA connectors
(SATA4 & 5 only can work under AHCI or RAID mode due to NVIDIA chipset limitation)
1 x Speaker header
1 x Front panel audio header
1 x Front panel switch/LED header
1 x SPDIF out header
1 x CLR COMS
1 x IR header
1x CD in header
1 x COM1 header
3 x USB headers

SYSTEM BIOS

AMI BIOS with 8Mb SPI Flash ROM
Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI
Supports ACPI 3.0 revision

FORM FACTOR

ATX Size, 305mm*220mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers