PCI-DB.com
  1. Driver
  2. Network Card
  3. Gigabyte GA-EQ45M-S2 Intel LAN Driver for Vista

Gigabyte GA-EQ45M-S2 Intel LAN Driver for Vista Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically
Device NameGigabyte GA-EQ45M-S2 Intel LAN Driver for Vista
CategoryNetwork Card
ManufacturerINTEL
File Size53 MB
Supported OSWindows Vista ,Windows Vista 64 bit

Gigabyte GA-EQ45M-S2 Intel LAN Driver for Vista Description

CPU   

1. Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/Intel Pentium Dual-Core processo/Intel Celeron processor in the LGA 775 package
2. L2 cache varies with CPU

Front Side Bus   

1. 1333/1066/800 MHz FSB

Chipset   

1. North Bridge: Intel Q45 Chipset
2. South Bridge: Intel ICH10DO

Memory   

1. 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1) (Note 2)
2. Dual channel memory architecture
3. Support for DDR2 800/667 MHz memory modules

Onboard Graphics

North Bridge:
1. 1 x D-Sub port
2. 1 x DVI-D port (Note 3) (Note 4)

Audio   

1. Realtek ALC888 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for S/PDIF In/Out
5. Support for CD In

LAN   

1. Intel 82567LM chip (10/100/1000 Mbit)

Expansion Slots   

1. 1 x PCI Express x16 slot, running at x16
(Go to GIGABYTE's website for the graphics card support list.)
2. 1 x PCI Express x1 slot
3. 2 x PCI slots

Storage Interface

South Bridge:
1. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
2. Support for SATA RAID 0, RAID 1, RAID 5 and RAID 10.

JMicron 368 chip:

1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

iTE IT8720 chip:

1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB   

1. Integrated in the south bridge
2. Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors   

1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 6 x SATA 3Gb/s connectors
6. 1 x CPU fan header
7. 1 x system fan header
8. 1 x front panel header
9. 1 x front panel audio header
10. 1 x CD In connector
11. 1 x S/PDIF In/Out header
12. 3 x USB 2.0/1.1 headers
13. 1 x serial port header
14. 1 x debug card header (Note 5)
15. 1 x jumper for enabling Intel Management Engine Feature
16. 1 x clearing CMOS jumper
17. 1 x power LED header
18. 1 x chassis intrusion header

Back Panel Connectors

1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x parallel port
4. 1 x D-Sub port
5. 1 x DVI-D port (Note 3) (Note 4)
6. 6 x USB 2.0/1.1 ports
7. 1 x RJ-45 port
8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line out/Microphone)

I/O Controller   

1. iTE IT8720 chip

H/W Monitoring   

1. System voltage detection
2. CPU/System temperature detection
3. CPU/System fan speed detection
4. CPU overheating warning
5. CPU/System fan fail warning
6. CPU/System fan speed control (Note 6)

BIOS   

1. 2 x 16 Mbit flash
2. Use of licensed AWARD BIOS
3. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features   

1. Support for @BIOS
2. Support for Q-Flash
3. Support for Virtual Dual BIOS
4. Support for Download Center
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for Dynamic Energy Saver Advanced
8. Support for Ultra TPM
9. Support for Time Repair
10. Support for Q-Share

Bundle Software   

1. Norton Internet Security (OEM version)

Form Factor

1. Micro ATX Form Factor; 24.4cm x 24.4cm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.