WD My Passport Wireless Storage Firmware 1.04.06 Download

Posted at December 22, 2024 by PCI-DB Team

WD My Passport Wireless Storage Firmware 1.04.06 Description

Changes:

- Resolved My Cloud App connection issues with iOS
- Resolved issue with LED not immediately blinking when starting SD card transfer
- Resolved shellshock vulnerability
- Resolved medium cipher suites supported
- Resolved incorrect time/date on some SD card transferred files
- Resolved issue of only a single partition shown on network

To update the firmware:

- Download the firmware to your desktop
- Unzip the file and you will find the actual firmware in this format: MyPassportWireless_x.bin
- Save this to your desktop
- Connect to the My Passport Wireless Wi-Fi network
- Open the My Passport Wireless Dashboard UI
- Go to Firmware Tab
- Under the section Manual Update, click the Update From File button and a window will open
- Browse to where you saved the MyPassportWireless_x.bin file and select it.
- You will see a pop up confirming to upgrade your firmware, click Ok.

Important product update notes:

- Do not interrupt the firmware upgrade process. Doing so may cause the device to malfunction or render it unable to boot.
- If you are using the manual update method, do not rename the firmware file. Doing so will cause the manual update to fail.

About Network-Attached Storages:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Western Digital Drivers