ATI Catalyst Display Driver 10.11 for XP Download
Posted at November 24, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | ATI Catalyst Display Driver 10.11 for XP |
|---|
| Category | Graphics Board |
|---|
| Manufacturer | ATI |
|---|
| File Size | 42.9 MB |
|---|
| Supported OS | Windows XP |
|---|
ATI Catalyst Display Driver 10.11 for XP Description
Performance Improvements:
The following performance improvements were observed with this release of AMD Catalyst 10.11:
-Battleforge : Performance increases up to 3% on ATI Radeon HD 5800 Series single and CrossFire configurations with anti-aliasing disabled.
-STALKER – Call of Pripyat benchmark: Performance increases up to 5% on ATI Radeon HD 5800 Series single and CrossFire configurations
Resolved Known Issues for the Windows 7 Operating System
This section provides information on resolved known issues in this release of the AMD Catalyst 10.11 software suite for Windows 7. These include:
-Running fullscreen DirectX 9 applications/games after enabling Aero effects and rebooting no longer causes the system to randomly stop responding
-Primary display no longer blanks out intermittently during "World in Conflict: Soviet Assault" DirectX10 gameplay with CrossFire and Dual Monitor enabled
-"Stone Giant" DirectX 11 demo no longer intermittently fails in fullscreen mode with CrossFire enabled under Multi-GPU configurations on some cards
-Task switching out of "Battlefield: Bad Company 2" and then back into the game no longer causes CrossFire to become disabled
-Enabling in-game Anti-Aliasing and utilizing Edge-Detect filters no longer causes smoother lines but blurry textures when compared to the Standard filter on some cards
-Desktop line corruption is no longer observed after hotplugging the HDCP display on some cards
-Enabling Overdrive through the Catalyst Control Center for single display systems no longer results in GPU clocks running at high levels in non-GPU intensive scenarios
Resolved Known Issues for the Windows Vista Operating System
-Running fullscreen DirectX 9 applications/games after enabling Aero effects and rebooting no longer causes the system to randomly stop responding
-When "World of Warcraft" is launched via TriDef 3D and hardware cursor is enabled, the mouse cursor no longer intermittently flickers and disappears
-Hot swapping a HDCP display panel with a non-HDCP display no longer causes the display to turn blank after resuming from sleep/hibernate during Blu-ray disc playback
Known issues under the Windows 7 operating system
The following section provides a summary of open issues that may be experienced under the Windows 7 operating system in the latest version of AMD Catalyst. These include:
-Task switching to desktop and then back into "Far Cry 2" DX10 game may result in performance drop with CrossFire enabled under Multi-GPU configurations
-Drag and Drop transcoded H264i content may show de-interlacing lines
-Display may intermittently turn blank on launching "Enemy Territory: Quake Wars" or during game play under Multi-GPU configurations on some cards
-With CrossFire enabled, flickering may be observed in OpenGL games when refresh rate is set to 100Hz or higher on some cards
-Desktop may dim after exiting "Mafia II" game on some cards
-Under multi-adapter configuration, various rotated displays in Eyefinity set up might not be retained after reboot
-Mouse cursor may intermittently be corrupt/missing in one of the displays under Eyefinity configuration while playing games/samples
-Tearing corruption may be visible in specific "StarCraft II" game campaigns at low resolution settings (1024x768) on some cards
-Switching from 32-bit to 16-bit colordepth during WMV media playback may cause the video to go blank on some cards
-Enabling CrossFire in "Far Cry 2" DirectX 9 may result in low performance and benchmark failing to complete on some cards
-"Tom Clancy's Endwar" may stop responding during game cut scenes on some cards
-Enabling anti-aliasing in "StarCraft II: Wings of Liberty" may cause outline highlights to be rendered incorrectly on some cards
-Green texture corruption may be observed when resolution/video settings are changed in "Metro 2033" game in DirectX 10 and 11 mode on some cards
-Rebooting a system with a CRT connected to the MiniDP port may cause all resolutions except 640x480 to go missing
-Windows Media Center application may stop responding or system may intermittently fail while playing 1080p video in 2x2 & 4X1 Eyefinity mode
Known Issues under the Windows Vista Operating System
The following section provides a summary of open issues that may be experienced under the Windows Vista
operating system in the latest version of AMD Catalyst. These include:
-Corruption might be visible in "Doom 3" and "Quake 4" with ATI Radeon HD 4700 Series
-All but the primary display under Eyefinity configuation might become disabled while changing the preferred display at lowest Bezel compensated resolution
-Performing bezel compensation on 3x2 Eyefinity configuration may cause the bezel group (resolutions) to go missing
Known Issues under All Windows Operating Systems
The following section provides a summary of open issues that may be experienced under the Windows operating system in the latest version of AMD Catalyst. These include:
-Catalyst Control Center: Enable dialog reposition does not show on proper monitor when system is configured with 4 displays
-Switching the preferred display in specific Eyefinity configurations may cause the displays to become disabled
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related ATI Drivers