ECS A780LM-M (V7.0) Bios 10/13/2010 Download

Posted at June 29, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ECS A780LM-M (V7.0) Bios 10/13/2010
Category	Bios
Manufacturer	ECS
File Size	961 KB
Supported OS	Windows All

ECS A780LM-M (V7.0) Bios 10/13/2010 Description

CPU
- Socket AM3 socket for AMD Phenom II /Athlon/ Sempron processors
- High-performance HyperTransport 1.0 CPU Interface
- Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.

CHIPSET
- AMD 760G & AMD SB700
- North Bridge: AMD 760G
- South Bridge: AMD SB700

GRAPHICS
- Su chip (AMD 760G basato su tecnologia grafica ATI Radeon HD3000 )
- Integrated DirectX 9 graphics processor
- Share Memory: Maximum up to 512MB

MEMORY
- Dual-channel DDR3 memory architecture
- 2 x 240-pin DDR3 DIMM socket support up to 8 GB
- Support DDR3 1333/1066 SDRAM

EXPANSION SLOT
- 1 x PCI Express x16 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots

STORAGE
- Support by AMD SB700
    • 4 x Serial ATAII 3.0Gb/s devices
    • RAID0, RAID1, RAID10 configuration

AUDIO
- VIA VT1705 6-channel audio CODEC
- Compliant with HD audio specification

LAN
- Realtek RTL8103EL 10/100 LAN (RTL8111DL Gigabit LAN Optional)

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x DVI connector (optional)
- 1 x RJ45 LAN connector
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 4 x USB 2.0 Ports

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x 4-pin CPU_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x IDE connector
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x Clear CMOS header
- 1 x Serial port header
- 1 x Parallel Header
- 4 x SATAII 3Gb/s connectors
- 2 x USB 2.0 headers support additional 4 USB 2.0 Ports
- 1 x Chassis intrusion header

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Audio, LAN, can be disabled in BIOS
- Support eJIFFY

FORM FACTOR
- Micro-ATX Size, 244mm*210mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ECS Drivers