Grandstream GXP2170 IP Phone Firmware 1.0.8.49 Beta Download

Posted at December 22, 2024 by PCI-DB Team

Grandstream GXP2170 IP Phone Firmware 1.0.8.49 Beta Description

IMPORTANT UPGRADING NOTE:

- For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware version or lower is not supported.
- For GXP2170/2135, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version or lower is not supported.
- This release adds Predictive Dialing feature which included a required internal change. If you downgrade from 1.0.8.49 to 1.0.7.25 you will lose the call history.

ENHANCEMENTS:

- Added ability to search a string in any position using Quick search [SEARCH A STRING WITH QUICK SEARCH]
- Added Date in the top panel on the phone LCD Screen[DATE DISPLAY ON LCD SCREEN]
- Added Support of syslog over TLS [SUPPORT OF SYSLOG OVER TLS]
- Added disable call waiting per account [DISABLE CALL WAITING PER ACCOUNT]
- Added option to sort Broadsoft phonebook by Last/First Name [SORT BROADSOFT PHONEBOOK BY LAST/FIRST NAME]
- Added ability to lock the phone ringing volume [LOCK RING TONE VOLUME]
- Added ability to search with case insensitive in Web UI phonebook [CASE INSENSITIVE IN PHONEBOOK SEARCH]
- Added Call on Hold reminder improvement [CALL ON HOLD REMINDER IMPROVEMENT]
- Added Auto-answer ring alert [AUTO-ANSWER RING ALERT]
- Added Support for AES-256 in SRTP Call [AES-256 SUPPORT IN SRTP CALL]
- Added Support of Provisioning "Trusted CA Certificates" [TRUSTED CA CERTIFICATE SUPPORT]
- Added ability to display Broadsoft call center status on idle screen[BROADSOFT CALL CENTER STATUS DISPLAY]
- Added GDS support Integration [GDS SUPPORT]
- Added show GDS OpenDoor softkey as long as remote number matches [GDS OPENDOOR SUPPORT]
- Added username/password authentication and cipher option on web [USERNAME/PASSWORD AUTHENTICATION WITH OPENVPN]

BUG FIXES:

- Fixed Receiver heard nothing issue in multicast paging calls
- Fixed VPK cannot provision successfully issue if configuration file have P values requiring reboot
- Fixed OnHook Dialing window disappears issue when there is an incoming call
- Fixed There was no Redial softkey in the More softkey list issue if set 3 softkeys are configured in idle page
- Fixed LCD skipped to screensaver status directly issue after bluetooth scan page in Idle brightness status
- Fixed VPK LED flashed Red once issue if the VPK located Line came calls in non-page1
- Fixed Line key LED turned off issue after switching pages in calling status of Account Mode
- Fixed Line key LED worked abnormally issue when locked the Default mode in Account mode
- Fixed DUT play ring back tone instead of call waiting tone issue
- Fixed The transferring line LED displayed abnormally issue
- Fixed Mute Key Function worked abnormally after coming call then cancel
- Fixed The way of Upload image could not effect in the upload picture firstly
- Fixed Pressing Hold key couldn't recover call after pressing Hold key twice.
- Fixed Phone fails to download Language file when options "config via" and "firmware upgrade via" are set to use different protocols
- Fixed No audio for incoming multicast paging with codecs other than PCMU
- Fixed Multicast paging call will always display PCMU codec even if using a different codec
- Fixed Device worked abnormally if came call in audio loopback mode after setting ForwardAll
- Fixed The picture of contact disappeared after edited the contact with picture in DUT
- Fixed Eventlist BLF Only Auto Provisions First VPK Page Upon Reboot
- Fixed The members of Eventlist BLF URI disappeared in VPK when updated to 8.46 from1.0.7.97
- Discrepancies with Multicast Codec Defined at the Sender Side
- Fixed Phone GUI freeze after a weekend of no use
- Fixed EXT 20 disappear when register/unregister account
- Fixed Fails to send call after 2 minutes of idle time when DUT is connected to a BT HSet
- Fixed Device generated core dump file issue after changed the option of Auto Provision List Starting Point
- Fixed Device did not display the certificate information in web page when uploaded the CA certificate by cfg.xml
- Fixed cfg.xml can't provision MPK 8-18
- Fixed No audio upon answering multiple calls
- Fixed Mute Key Function worked abnormally after coming call then cancel
- Fixed LCD didn't show relevant prompting after pressing opendoor softkey
- Fixed DUT worked abnormally in the incoming call after dialed the account with picture
- Fixed The phone worked abnormally after answered call before perform re-register
- Fixed Chinese translation of 'Force BLF Call-pickup by prefix' is wrong
- Fixed There was no sound in SRTP call issue
- Fixed Multicast paging call listening address didn't work until hard reboot
- Fixed Password displayed abnormally on External Device page
- Fixed GXP2130v1 Does Not Answer Multicast issue
- Improved GXP21xx BLF status update based on Call-ID of NOTIFY

About VoIP Phone Updates:

Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.

One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.

Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.

Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don’t launch standalone update packages.

Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.

If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Grandstream Drivers