Nikon KeyMission 170 Camera Firmware 1.2 Download

Posted at November 23, 2024 by PCI-DB Team

Nikon KeyMission 170 Camera Firmware 1.2 Description

Changes:

- Made improvements regarding an issue which resulted in connections between the camera and iOS 10.2-compatible versions of the SnapBridge 360/170 app becoming unstable.

Note:
- Users of iOS 10.2 will also need to upgrade the SnapBridge 360/170 app to the latest version, which supports iOS 10.2.

Updating the Camera Firmware

- Create a folder on the computer hard disk and name it as desired.
- Download F-KM170-V11W.exe to the folder created in Step 1.
- Run F-KM170-V11W.exe to extract the firmware to a sub-folder in the new folder. The resulting file and folder hierarchy is shown below:
firmware (the sub-folder containing the firmware)
firmware.bin (the camera firmware, located in the “firmware” folder)
- Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the camera on.
- Select Camera settings > Firmware version in the (setup) menu and follow the on-screen instructions to complete the update. The camera will turn off automatically when the update is complete.
- Turn the camera on, then format the memory card.
- Confirm that the firmware has been updated to the new version.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Nikon Drivers