D-Link DGS-1210-10P rev.F1 Smart Switch Firmware 6.00.016 Download

Posted at November 27, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	D-Link DGS-1210-10P rev.F1 Smart Switch Firmware 6.00.016
Category	Router Switch Access Point
Manufacturer	D-Link
File Size	9.5 MB
Supported OS	OS Independent

D-Link DGS-1210-10P rev.F1 Smart Switch Firmware 6.00.016 Description

Firmware Version: 6.00.016
Boot Code Version: 1.00.009
MIB Version: 6.00.011

Upgrade using Web-UI

1. Connect a workstation installed with java SE runtime environment to any switch port of the device.
2. Open the web browser from the workstation and enter the IP address of the switch. The switch’s default IP address is 10.90.90.90.
3. Enter administrator’s password when prompted. The password is admin by default.
4. To update switch's firmware or configuration file, select Tools > Firmware Backup & Upgrade from the banner.
5. Two methods can be selected : HTTP or TFTP
a. Click Browse to browse your inventories for a saved firmware file
b. Click Upgrade after selecting the firmware file you want to restore
c. Click OK to continue with firmware upgrade
d. Click OK to continue with firmware upgrade 
e. Wait until the “Firmware Upgrade Successful” message pops up and login again after device boots up.
7. Select TFTP to upgrade the firmware to or from a remote TFTP server.
a. Enter the name of the firmware file located on the TFTP server
b. Click Upgrade after selecting the firmware file you want to restore
c. Click OK to continue with firmware upgrade 
d. Wait until the firmware upgrade ends and login again after device boots up.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers