D-Link DCS-6511 rev.A1 Network Camera Firmware 1.11.13 Download

Posted at April 30, 2024 by PCI-DB Team

D-Link DCS-6511 rev.A1 Network Camera Firmware 1.11.13 Description

New Features:

1. Add the 4:3 & 16:9 aspect ratio switch function.
2. Add the Number of active profiles switch function
3. Add the Exposure Mode of image settings.
4. Add the de-noise of image settings.
5. Add NIPCA Protocol:
6. Add IPV6, QoS, CoS, RTSP multicast, RTSP digest authentication
7. Add ftp sub directory support 8. Support DUSA request snapshot CGI

Problems Fixed:

1. Fixed DUT would be in black screen after zoom out in LIVE VIDEO page
2. Fixed Live Video would be unavailable after live view by Chrome for a while 3. Fixed I.E would popup warning message when change profile to live view DUT with new user account in LIVE VIDEO page.
4. Fixed DUT would upload invalid recording files to a SMB server
5. Fixed There isn't any recording file in 10/8 20:00-22:00 and all recording files are only 3 KB after 10/8 23:00
6. Fixed the Recording Indicator still blink when SD card have been removed. 7. Fixed the black screen instead of video on the IE9
8. Fix sender’s interface in PPPoE mode.
9. Fixed NTSC frame-rate Setting = 12、5 / PAL Setting = 15、12、10、7, The image is not smooth
10. Fixed the System log records the access list error problem
11. Fixed smart phone issue
12. Fixed JPEG quality will be abnormal, when use the NIPCA to get the JPEG quality.
13. Fix bug for Samba server cannot be mounted at different network segment
14. Fix Gmail test fail when change time
15. Fix sign of recording out of schedule time
16. Fixed the live video & audio sync issue.
17. Recording size change to 50MB/ 60sec and Event clip change to 5MB. 18. Fix uPnP port forwarding setting and status
19. Fix ftp can accept '' or '/' character in path
20. Fix bug: after enable https, the HTTP server be restarted too late.
21. Fix rewrite condition changes from 80% to 90%
22. Fixed autofocus abnormal when the device reboot.
23. DUT DDNS didn't update IP and would reboot after enable DDNS.

Upgrading Instructions:

Follow the steps below to upgrade the firmware:
1. Download the latest firmware file from the D-Link website. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade
3. Click Browse… and specify the firmware file.
4. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers