D-Link DCS-942L Rev.B2 Camera Firmware 2.11.04 Download

Posted at December 22, 2024 by PCI-DB Team

D-Link DCS-942L Rev.B2 Camera Firmware 2.11.04 Description

New Features

1. Hide the CSRF protection option, and enable it by default.
2. Add the notification message for Chrome 45 and above.
3. Add the notification message for Win10/Edge.
4. Add new filed “Hardware Version” on Status Device Info.
5. Support Window format size SD card.
6. Remove Direct mode feature from DCS-942LB.
7. Support D-Link UID mechanism.
8. Support serial console password protection.
9. Support EN300328 v1.9.1.
10. Refine product name / camera name / banner / OSD label / hardware version to fit new spec.
11. Upgrade mydlink agent to v2.1.0-b03.
12. Upgrade ActiveX/NCSPlugin for Windows to v1.0.0.10510.
13. Change the folder name as “DCS-942LB” for local recording and SD recording.
14. Update the time zone table for Russian and Chile.
15. Change the default system time and copyright for year 2016.
16. Refine the firmware version naming definition.
17. Remove the AVI file format from SD recording and Video Clip function.
18. Remove the Ad-Hoc function and refine WebUI. 
19. Improve the wireless site survey function in order to get more wireless

Problems Fixed:

 
1. Fix following vulnerabilities of Onward security test. OnSec-VUZ-103-48001, TLS/SSL Server Supports Weak Cipher Algorithms OnSec-VUZ-103-48002, OpenSSL CCS Injection
2. Fix the DNR-202L password error issue for LANDAP.
3. Fix the unsuitable response issue for API /cgi/admin/adv_do.cgi.
4. Fix the ONVIF vulnerability for not well-formed request.
5. Fix support issue -Low sensitivity for motion detection.
6. Correct the Content-Type for NIPCA APIs.
7. Fix the incorrect NIPCA XML response as well-format.
8. Fix command "mdb get cur_ip_info" can't get the current IP address correctly issue.
9. Fix support issue False PIR Trigger.

Upgrading Instructions:

Follow the steps below to upgrade the firmware:
1. Download the latest firmware file. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade
3. Click Browse… and specify the firmware file.
3. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers