D-Link DNR-322L NVR Firmware 2.0.25 Download

Posted at November 1, 2024 by PCI-DB Team

D-Link DNR-322L NVR Firmware 2.0.25 Description

New Features:

1. New Camera Support:
DCS-2530L

Problems Fixed:

1. Fixing DCS-960L Audio Noise issue for TCP/UDP connection 

Known Issues:

1. DCS-2530L
i. The camera PTZ function might not work normally when using RS-485 (camera firmware issue)
ii. Alarm I/O cannot work normally (camera firmware issue)
iii. Video parameter sometime cannot be retrieved normally (camera firmware issue)

P.S.

Device Pack V2.0.x only allows to be installed in DNR-322L (HW:A) V2.4 FW

Installation steps:

1. Download the firmware. The file is in .bin file format.
2. Log-in into web UI and enter setup/Maintenance/Firmware upgrade.
3. Click Browse… and specify the firmware file.
4. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Network Video Recorder Updates:

Applying a new firmware package on your Network Video Recorder (NVR) should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The NVR should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Network Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers