Intel Rapid Storage Technology Preinstall Driver 15.2.0.1020 64-bit Download

Posted at April 27, 2024 by PCI-DB Team

Intel Rapid Storage Technology Preinstall Driver 15.2.0.1020 64-bit Description

Resolved Issues

- Crash dump is not generated on raid configurations
- SLP_S0 residency is sporadically poor on samples
- System - PNP (disable and enable) with IO Before and After (Reliability)" failed.
- 'Flexible data protection (Recovery)' is not available when the secondary hard drive is the same size as the primary hard drive.
- Glitch in camera video feed when access to USB simultaneously with SRT background traffic
- Hang after power off cache disk
- BSOD 0xF4 when run restart only test on win7OS.
- Create option missing from RST UI in discrete graphics legacy boot mode with RAID enabled.
- Intel RST 15.0.0.1039 UI displays Windows 10 version and build number different from msinfo
- RST Bugcheck A0 during stress test when resuming from hibernate
- Windows 10 is not listed as a supported OS in the Readme File Information for IRST
- BSOD when performing S4 right after creating RAID volume with OS
- M.2 SSD also show SMART risk event when a SMART HDD is connected
- Error message when user try to import DevSlp registry keys
- Platform hangs during enter into S3/S4 with remapping
- The new ZPODD tool version is still not changed ( 1.0.0.1003) after installed ZPODD tool v15.0
- iRST will disappear from Control Panel after repair with different install kit

Notes:

1. Known Issue is defined as a potential RST issue that has been replicated internally by the Rapid Storage Technology team but has not been root caused to be an RST defect.
2. 15.1 version is renamed to 15.2 version for internal logistic purposes. RST 15.1 version will no longer be used.
3. This build has been validated on and supports Windows 10 RS1.
4. The RAID OROM & UEFI version for this release is 15.2.0.2754, the driver and user interface version is 15.2.0.1020. For RAID configurations, it is recommended that both the pre-OS and RST OS driver components are updated. Please contact your CE for further details.
5. No RST support for PCIe storage devices in AHCI mode.

Known Issues:

- There is a black screen on S4 stress test
- OS does not run smoothly during about one minute after resume from s3.
- Keyboard loses function at the "Ctrl+I" menu in RAID mode after touch the touchpad
- Cannot use left/right arrow in RAID menu (Ctrl I) after we idle test unit more than one minute.
- The "Ctrl+I" menu will hang when trying to choose some options via “up” between “down” key for a short period of time in RAID mode.
- System has BSOD 0XEF issue when playing video and running" HDD copy and compare" at the same time.
- System will auto enable "write-caching" after S3/S4/CB resume only on NVMe SSD
- When enter SLP_S0, the SSD power consumption is too high - more than 20mW.
- System get SCT fail under RAID mode. windows.10_rs1.x64
- "Zero Power ODD Tool" cannot be installed normally on Win8.1 if QFE - KB3126593 is installed.
- It takes more than 30 sec to send command to NVMe device after it enters D3
- When secure boot is on the SUT will boot into OS and create some error logs.
- SUT will hang on Logo when change slot with NVMe SSD
- System Run 3D mark11 Got low performance issue with IRST installed.
- RAID1 system will hang, when one of the HDDs is removed from the RAID volume.
- BSOD or Lost disk during S4 on 2 remapped disks with RAID0/RAID1 and in nonRAID status
- There is BSOD on DS3 aging overnight
- The benchmark result of RAID1 and RAID5 are too low other
- SRT not correctly created when doing system restart immediately after enabling acceleration
- Disk was removed from RRT volume after clicked "Access recovery disk files"
- After using all disk in logical volumes then clicking create, IAStroUI has stopped working appears on the screen
- After Encrypting OS on Nvme device, it becomes Inaccessible after 3 Hibernations or 3 Restarts

About SATA / AHCI / RAID Preinstall Drivers:

Download this package if you intend to switch the SATA settings between available modes (AHCI, RAID, or IDE) after an operating system has been installed.

Remember that if you modify these settings without applying the proper files, the OS will not be able to boot until requirements are met or changes are reverted.

As for the installation method, it would be best if you refer to the manufacturer’s update guide, read all the steps, and initiate this task only when you have completely familiarized yourself with the procedure.

Even though other platforms might also be compatible with this release, we strongly recommend that you apply the driver only on specified operating systems in order to successfully perform the installation. If a failure occurs, the computer could suffer serious malfunctions.

With these in mind, if you wish to modify the SATA settings according to the mode highlighted in this version, click the download button and make the desired changes. Visit our website as often as possible to stay up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers