D-Link DNS-340L Rev.A1 NAS Firmware 1.05.B04 Download

Posted at December 21, 2024 by PCI-DB Team

D-Link DNS-340L Rev.A1 NAS Firmware 1.05.B04 Description

Fixes:

- Stored XSS via Unauthenticated SMB Vunerability on D-Link NAS Devices

NOTE:

- Reboot the box before start performing any upgrade.
- Save current settings to a desktop computer (System->Settings, in the "Computer Disk" section, "Save current settings to file", hit the Download button)
- Look at the box bottom attached label to see its hardware revision level, then select the appropriate Alt-F-0.1RC4 bin file for it and use the normal firmware upgrade method to flash it.
For example, the Alt-F-0.1RC4-DNS-323-rev-A1B1C1.bin file is to be used on the DNS-323 rev-A1, rev-B1 or rev-C1. Don't try to flash firmware if your box is not supported, e.g., the DNS-320-revB1 is not supported
- All Disk-installable packages must be updated (Packages->Alt-F, UpdatePackagList, then UpdateAll) Stop all services before doing that (System->Utilities, Services section, hit the StopAll button)

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers