Intel Rapid Storage Technology (RST) Driver 15.2.0.1020 Download

Posted at April 27, 2024 by PCI-DB Team

Intel Rapid Storage Technology (RST) Driver 15.2.0.1020 Description

Resolved Issues

- Crash dump is not generated on raid configurations
- SLP_S0 residency is sporadically poor on samples
- System - PNP (disable and enable) with IO Before and After (Reliability)" failed.
- 'Flexible data protection (Recovery)' is not available when the secondary hard drive is the same size as the primary hard drive.
- Glitch in camera video feed when access to USB simultaneously with SRT background traffic
- Hang after power off cache disk
- BSOD 0xF4 when run restart only test on win7OS.
- Create option missing from RST UI in discrete graphics legacy boot mode with RAID enabled.
- Intel RST 15.0.0.1039 UI displays Windows 10 version and build number different from msinfo
- RST Bugcheck A0 during stress test when resuming from hibernate
- Windows 10 is not listed as a supported OS in the Readme File Information for IRST
- BSOD when performing S4 right after creating RAID volume with OS
- M.2 SSD also show SMART risk event when a SMART HDD is connected
- Error message when user try to import DevSlp registry keys
- Platform hangs during enter into S3/S4 with remapping
- The new ZPODD tool version is still not changed ( 1.0.0.1003) after installed ZPODD tool v15.0
- iRST will disappear from Control Panel after repair with different install kit

Notes:

1. Known Issue is defined as a potential RST issue that has been replicated internally by the Rapid Storage Technology team but has not been root caused to be an RST defect.
2. 15.1 version is renamed to 15.2 version for internal logistic purposes. RST 15.1 version will no longer be used.
3. This build has been validated on and supports Windows 10 RS1.
4. The RAID OROM & UEFI version for this release is 15.2.0.2754, the driver and user interface version is 15.2.0.1020. For RAID configurations, it is recommended that both the pre-OS and RST OS driver components are updated. Please contact your CE for further details.
5. No RST support for PCIe storage devices in AHCI mode.

Known Issues:

- There is a black screen on S4 stress test
- OS does not run smoothly during about one minute after resume from s3.
- Keyboard loses function at the "Ctrl+I" menu in RAID mode after touch the touchpad
- Cannot use left/right arrow in RAID menu (Ctrl I) after we idle test unit more than one minute.
- The "Ctrl+I" menu will hang when trying to choose some options via “up” between “down” key for a short period of time in RAID mode.
- System has BSOD 0XEF issue when playing video and running" HDD copy and compare" at the same time.
- System will auto enable "write-caching" after S3/S4/CB resume only on NVMe SSD
- When enter SLP_S0, the SSD power consumption is too high - more than 20mW.
- System get SCT fail under RAID mode. windows.10_rs1.x64
- "Zero Power ODD Tool" cannot be installed normally on Win8.1 if QFE - KB3126593 is installed.
- It takes more than 30 sec to send command to NVMe device after it enters D3
- When secure boot is on the SUT will boot into OS and create some error logs.
- SUT will hang on Logo when change slot with NVMe SSD
- System Run 3D mark11 Got low performance issue with IRST installed.
- RAID1 system will hang, when one of the HDDs is removed from the RAID volume.
- BSOD or Lost disk during S4 on 2 remapped disks with RAID0/RAID1 and in nonRAID status
- There is BSOD on DS3 aging overnight
- The benchmark result of RAID1 and RAID5 are too low other
- SRT not correctly created when doing system restart immediately after enabling acceleration
- Disk was removed from RRT volume after clicked "Access recovery disk files"
- After using all disk in logical volumes then clicking create, IAStroUI has stopped working appears on the screen
- After Encrypting OS on Nvme device, it becomes Inaccessible after 3 Hibernations or 3 Restarts

About RST (Rapid Storage Technology):

Once Intel’s Rapid Storage Technology (RST) driver is applied, desktop and notebook systems will be able to manage the available storage (one or more drives) more easily.

And that’s not all you should expect: updating the RST version can also bring about improved storage performance, lower power consumption, faster boot times, quicker data reads, as well as several other changes.

As far as applying this release is concerned, simply make sure your system configuration is compatible with this package, run the available setup, and follow the on-screen instructions for a complete installation. In addition to that, don’t forget to perform a reboot to make sure that all changes take effect properly.

Even though other operating systems might be compatible as well, we do not recommend installing this package on platforms other than the specified ones.

With this in mind, click the download button, and get and apply the present version. Also, check with our website as often as possible in order to stay up to date with latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers