Canon EOS C100 Camcorder Firmware 1.0.8.1.00 for Mac OS Download

Posted at November 21, 2024 by PCI-DB Team

Canon EOS C100 Camcorder Firmware 1.0.8.1.00 for Mac OS Description

Changes:

1. The following features are enabled when these lenses are attached: CN7x17 KAS S/E1, CN-E18-80mm T4.4 L IS KAS S or CN20x50 IAS H/E13.
- Saving and displaying metadata, such as the model name and the focal distance of the lens attached.
- Support for peripheral illumination Correction.
- Manual Iris control via the camera's control dial on the grip.
- Zoom operation via the joystick on the camera's.
- Control of focus, zoom and iris using the separately-sold Remote Controller RC-V100.
- Automatic aperture and push auto iris functions.
- Operation of REC start/stop via the lens's grip unit.
The lens firmware also needs to be updated. If you have CN7x17 KAS S/E1 or CN20x50 IAS H/E1, please contact to Canon Support Center.

2. Adds Peripheral Illumination Correction for the following lenses:
- EF 35mm f/1.4L II USM
- EF 50mm f/1.8 STM
- EF-S 18-135mm f/3.5-5.6 IS USM
- EF 24-105mm f/4L IS II USM

Notes:

- This firmware version is only for EOS C100 cameras without the Dual Pixel CMOS AF Feature Upgrade. If the EOS C100 camera has the Dual Pixel CMOS AF Feature Upgrade applied, please download Canon EOS C100 DAF Firmware.
- If your camera's firmware is already running the present version or newer, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.
- All camera settings will be reset formatted when you perform the firmware update.
- It is not possible to revert the firmware back to a previous version after you have performed the firmware update.
- Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source during the firmware update. Doing so may cause the camera to malfunction.

Check the current firmware version:

- Connect the compact power adapter and DC cable to the camera, and insert the battery pack into the camera.
- Slide the POWER switch to CAMERA.
- Press the MENU, and open the [Firmware] submenu. The current camera firmware version will appear on the screen.
- Press the MENU, and slide the POWER switch to OFF.
- The firmware update takes approximately 6 minutes to complete. During the update, please do not turn off the camera or operate any of its controls. Doing so may cause the camera to malfunction.

Firmware Update Instructions:

- Insert the SD card into the camera’s SD card slot A.
- Slide the power switch to CAMERA.
- Press the MENU, and open the [Initialize Media] submenu. [ Other Functions] -> [Initialize Media]
- Select [ A] and then press the joystick.
- Select [Complete] and then press the joystick.
- Select [OK] and then press the joystick.
- If you are using the [Complete] initialization option, press the joystick twice to cancel the operation while it is in progress. You can use the SD card but all data will be erased.
- When the confirmation message appears, press the joystick.
- The SD card is initialized and all the data it contains is erased.
- Press the MENU, and slide the power switch to OFF, and then remove the SD card from the camera.
- Save and unzip the downloadable archive.
- Insert the initialized SD card into a card reader or the computer’s SD card slot.
- Copy the data, drag & drop the .FIM and safely remove the card.
- After inserting the charged battery pack into the camera, connect the camera to the power outlet using the compact power adapter.
- Insert the SD card prepared into the camera’s SD card slot A.
- Slide the POWER switch to CAMERA.
- Press the MENU, open the [Firmware] submenu, and then press the joystick. [ Other Functions] -> [Firmware]. The firmware update confirmation screen will be displayed.
- When you select [OK] and then press the joystick, the firmware update will start.
- After the update ends, the camera will restart automatically, and a firmware update completion screen will be displayed.
- When you press the joystick, all settings will be reset and the [Date/Time] screen will appear. Set the date/time.
- Check that the firmware version has changed to the desired one.
- Slide the POWER switch to OFF, and then remove the SD card.

About Camcorders:

Upgrading your camcorder to a different firmware version should improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camcorder’s firmware can recover its functionality in the unlikely event that the currently installed version is faulty or the device’s performance dropped after an upgrade. However, you should bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camcorder’s firmware be carefully performed by a power user, but the process can also be initiated by a regular user at his or her own risk. Whichever the case, this step should be taken only when absolutely necessary.

When it comes to updating the device, make sure that you have saved all your personal data and configurations before initiating the process, and that the battery is fully charged. You’re not to use the unit’s buttons while the installation is in progress either.

As for the update method, most of the times, you’re supposed to copy the firmware file onto a suitable memory card, insert it into the camcorder, and start the upgrade from the device’s update section menu.

Still, each device has specific steps for a successful upgrade and various ways to enter update mode, which means that, before you set off to work, you must carefully read and understand the product’s installation guide.

With this in mind, if you consider installing this firmware, click on the download button, get the desired version, and apply it to the device; if not, check with our website as often as possible so that you don’t miss the update that will boost your camcorder’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related CANON Drivers