MSI K9A2GM V3 ATI SB7xx RAID Driver 3.1.1540.127 for Vista/Win7 Download

Posted at May 3, 2024 by PCI-DB Team

MSI K9A2GM V3 ATI SB7xx RAID Driver 3.1.1540.127 for Vista/Win7 Description

CPU

• AMD Phenom/Athlon/Sempron CPU.
• Support socket AM3 CPU. (65W only)
Please refer to CPU Support for compatible CPU; the above description is for reference only.

Hyper Transport Bus

• HyperTransport 3.0 supporting speed up to 5200MT/s
- AM2 CPU supports HyperTransport 1.0/2.0
- AM2+ CPU supports HyperTransport 3.0

Chipset

• AMD 740 and SB700 Chipset

Main Memory

• Supports DDR2 533/667/800/1066 (1066 for AM2+ only)
- 2 DDR2 DIMMs (240pin / 1.8V)
- Supports a maximum memory size up to 4GB.

Slots

• 1 PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V1.0 compliant)
• 1 PCI Express x1 slot
• 2 PCI slots, support 3.3V/ 5V PCI bus Interface.

On-Board IDE

• One IDE port by AMD SB700
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
- Can connect up to two IDE devices

On-Board SATA

• 4 SATA II (1~4) ports by AMD SB700
- Supports storage and data transfers at up to 3Gb/s

RAID Function

- SATA II 1~4 support RAID 0, 1, 0+1 and JBOD mode by AMD SB700
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

Audio

• Chipset integrated by Realtek ALC888/ALC662
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec

LAN

• Supports 10/100 Fast Ethernet by Realtek 8101E
• Supports 10/100/1000 Fast Ethernet by Realtek 8111C

IEEE1394 / FireWire

• Chipset integrated by JMicron 381
- Transfer rate is up to 400Mbps

Internal I/O Connectors

- ATX 24-pin power connector
- ATX 4-pin 12V CPU power connector
- CPU x1 / System x 1 FAN connectors
- CD-in connector
- Front panel audio connector
- Front panel connector
- 2 x USB 2.0 connector support additional 4 ports
- 1 x Floppy disk drive connector
- 4 x Serial ATA II connectors
- 1 x ATA133 IDE connectors
- Clear CMOS jumper
- 1 x SPDIF-out header
- 1 x IEEE1394 connector support additional 1 ports (optional)
- 1 x TPM module header (optional)
MSI Reminds You...
• The floppy disk cable will be optional.

Back Panel I/O Ports

- 1 x Parallel port
- 1 x Serial port (COM 1)
- 1 x Graphics Card port
- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 1 x 6 in 1 audio jack
- 4 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x IEEE1394 port (optional)

Dimension

• 24.4cm(L) x 21.5cm(W) M-ATX Form Factor

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers