Foscam FI9804W IP Camera Firmware 2.x.1.119_1 Download

Posted at December 22, 2024 by PCI-DB Team

Foscam FI9804W IP Camera Firmware 2.x.1.119_1 Description

Preparation before upgrading:

1. Please restart your camera before the upgrading;
2. Connect camera to router with an Ethernet cable before upgrading;
3. DO NOT upgrade firmware via wireless;
4. DO NOT upgrade firmware over internet, just finish it in LAN;
5. Keep power on during the upgrading;
6. Unplug the SD card before upgrading; 
7. Logging your camera as administrator first, upgrade firmware on web page.

About IP Camera Firmware / Software:

Applying the appropriate software for your network camera helps computers properly connect with the device, and adds support for various surveillance features that the camera benefits from (such as monitoring specific areas).

If you’re considering a software upgrade, you should know that this process might improve the unit’s overall performance and stability, add support for new features (or enhance existing ones), or include fixes for various issues. However, bear in mind that not all software updates bring significant changes.

As for the installation method, the steps vary depending on the type of software that you are about to apply; so, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device.

If you're thinking about applying this software version, hit the download button and update your camera once you have familiarized yourself with the installation method. In addition to that, don’t forget to check with our website as often as possible so that you don’t miss a single new release.           

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Foscam Drivers