Convergent Design Titan HD Extract Firmware 2016.10.1641 Download

Posted at December 22, 2024 by PCI-DB Team

Convergent Design Titan HD Extract Firmware 2016.10.1641 Description

Compatible Products:

- Odyssey7Q+
- Odyssey7Q
- Apollo Recorder/Switcher
- Sony FS RAW Record Option
- Canon RAW Record Option
- ARRIRAW Record Option
- POV RAW Record Option
- Apollo Option for Odyssey
- Varicam LT RAW Record Option
- Titan HD Extract

Apollo, 7Q and 7Q+

Titan HD Extract Mode
- FIXED Audio issue with Titan HD Extract using FSRAW
- FIXED Audio issue with Titan HD Extract from Video sources (HDMI, 6G etc)

Odyssey7Q/7Q+ Only
- FIXED audio issue with FSRaw to HD / 2K ProRes
- FIXED Playback with Varicam LT RAW

Odyssey7, 7Q, 7Q+, Apollo
- It is recommended for all users to update to the latest firmware, 2016.10.1641 to avoid audio issues with 2016.10.1639 released on 10-17-2016.

Known Issues

- ARRIRAW playback audio on the unit, may have occasional blips, recording is not affected.

NOTE:
- DURING FIRMWARE UPDATE, APOLLO/ODYSSEY OLED MAY DISPLAY ALL BLACK OR WHITE IMAGE. CONTINUE UPDATE UNINTERRUPTED FOR ONE HOUR, THEN CYCLE POWER.
- UPON COMPLETION OF FIRMWARE UPDATE, RESET UNIT TO FACTORY DEFAULTS. TO RESET THE UNIT TAP ⚙ APOLLO/ODYSSEY RESET ALL (FACTORY DEFAULTS)

NEW FEATURES: TITAN OPTION (APOLLO, ODYSSEY7Q+/7Q)

Titan HD Extract Upgrade Option
- Titan Option does not require Apollo or Odyssey RAW Bundle Options
- Titan Option not included in Apollo or Raw Bundle Options

Titan 4K/UHD -> 3xHD MultiFrame HD Extract
- Use one 4K/UHD input to generate three HD images
- One 4K/UHD->HD SuperSample, two HD pixel-to-pixel windows
- Record three generated HD images simultaneously (Apple ProRes)
- Record & output Live-Switch (Or Quad Split) between three HD images
- Live finger-drag pan/tilt windowed images with motion smoothing
- 4K/UHD 24p/25p/30p generates three 1080p video streams
- 4K/UHD 50p/60p generates three 720p video streams
- Input 4K/UHD 24p/25p/30p (6G-SDI/Dual-3G-SDI, HDMI)
- Input 4K/UHD 50p/60p (Quad-3G-SDI)
- NOTE: Odyssey7Q does not support 6G-SDI or 4K/UHD over HDMI
- NOTE: On 4K 4096x2160 input signals, Titan extracts all HD frames from the 3840x2160 UHD image area.

Titan FS RAW 4K -> 3xHD MultiFrame HD Extract
- Use one FS RAW 4K input to generate three HD images
- One 4K->HD SuperSample, two HD pixel-to-pixel windows
- Record three generated HD images simultaneously (Apple ProRes)
- Record & output Live-Switch between three HD images
- Live finger-drag pan/tilt windowed images with motion smoothing
- FS RAW 4K 24p/25p/30p generates three 1080p video streams
- FS RAW 4K 50p/60p generates three 720p video streams
- NOTE: Titan extracts all HD frames from the 3840x2160 UHD image area.

NEW FEATURES: APOLLO & APOLLO OPTION (ODYSSEY7Q+/7Q)

Quad-HD: EDL Support for all Live-Switch Modes
- Generates Edit Decision List (EDL) of cuts & fades made when recording
- EDL recorded as .EDL file in CMX3600 standard
- EDL also generated in Titan Option
- Up to 1000 events per clip
- Support for standard post systems including FCP7, FCPX, Premiere Pro, DaVinci Resolve, and Avid Media Composer (see White Paper “Working with EDLs from Apollo and Titan” on CD website)

Quad-HD: Live-Switch in All Modes
- Added Live-Switch to A/B/C/D and Quad-Split modes
- Live-Switch output as video to SDI B OUT; switching recorded in EDL

Quad-HD: 1080p 50/60 Live-Switch Support
- Added Live-Switch to Quad-HD 1080p 50/60
- Live-Switch output as video to SDI B OUT; switching recorded in EDL

Apple ProRes 422 (Proxy) Support
- 4K/UHD 23.98, 24, 25, 29.97, 30, 50, 59.94
- 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94
- 1080i 50, 59.94
- 720p 50/60

NEW FEATURES: ODYSSEY RAW BUNDLE (ODYSSEY7Q+/7Q)

Panasonic VariCam LT Support
- Record RAW in CinemaDNG from the Panasonic VariCam LT
- 4K/UHD 12-bit RAW -> 4K CinemaDNG 23.98, 25, 29.97
- 4K/UHD 10-bit RAW -> 4K CinemaDNG 23.98, 24, 25, 29.97, 50, 59.94
- VariFrame frame rates available from 2-60fps

ARRIRAW 4:3 Support
- Record RAW in .ARI from ALEXA cameras outputting a 4:3 signal
- 23.98-48p

Sony FS RAW to Apple ProRes Support (Update)
- Apple ProRes 422 (Proxy)
- 4K/UHD 23.98, 24, 25, 29.97, 30, 50, 59.94
- 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94

Canon Raw to Apple ProRes Support (Update)
- Apple ProRes 422 (Proxy)
- 4K/UHD 23.98-29.97

NEW FEATURES: ALL MODELS (APOLLO, ODYSSEY7Q+/7Q/7)

Canon CLog3 Preset LUTs
- LUTs for Canon CLog3 added as presets in LUT menu

Sony REV Preset LUTs
- Revised LUTs for use with Sony FS5 and FS Raw -> Apple ProRes Modes added as presets in LUT menu

System LOG File
- Text file that reside outside of the clip folder on a record SSD, includes information about record, power up, on time, and setup.

8-Channel Audio Out (Headphone) Selection
- Select audio channels to output over 3.5mm Audio Out port
- Select on 8-Channel SDI embedded audio
- Select embedded audio channel pairs 1&2, 3&4, 5&6, 7&8
- Also available in Apollo and Titan Options

Apple ProRes 422 (Proxy) Support
- 4K/UHD 23.98, 24, 25, 29.97, 30, 50, 59.94
- 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94
- 1080i 50, 59.94
- 720p 50/60

NEW FEATURES: ODYSSEY7

Apple ProRes 422 (Proxy) Support
- 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94
- 1080i 50, 59.94
- 720p 50/60

FIXES & IMPROVEMENTS

Apollo
- FIXED Cut transitions to single frame cut
- FIXED Issue with UHD25p over 6G-SDI
- IMPROVED SDI B Out carries embedded audio
- FIXED audio recording on B channel input in Dual 4K

Odyssey RAW Bundle
- FIXED Rare Canon RAW -> Apple ProRes frame issue
- FIXED Pixel Zoom causing monitored image shift when recording FS 4K RAW -> 4K/UHD Apple ProRes at 50/59.94p
- FIXED Frame Rate detection in Canon RAW
- FIXED FS RAW 100/120/200/240p where playback was twice as fast as intended. Recorded files are unaffected
- FIXED Intermittent issue of first frame corrupted in various RAW formats
- FIXED FS RAW FS700 issues with changing frame rates
- FIXED Rental issues with various modes
- IMPROVED FS RAW Files
- IMPROVED Sony FS7 4K FS RAW -> 4K/UHD Apple ProRes debayer color fringing issue (yellow artifact at sharp edges)
- IMPROVED Playback Scrubbing artifacts of RAW recordings

Odyssey7Q+/7Q
- FIXED Issue with UHD25p over 6G-SDI (7Q+ only)
- IMPROVED Playback of 4K Apple ProRes
- IMPROVED Playback scrubbing artifacts in 4K Apple ProRes

All Devices
- FIXED Guides interaction with Hide function
- FIXED Apple ProRes recording artifacts from firmware 2016.06 in Sony FS RAW to 4k 50/60 and 2k 200/240 under certain conditions
- FIXED Adobe “Green Screen” issue on files not processed through CD Apple ProRes Tool
- FIXED Adobe audio issue with 8-channel audio and CC 2015.4
- FIXED Safe-Eject “Error 11” and related errors
- FIXED C300 Mark II audio issues with 8-channel audio
- FIXED FS5 Image blink when not recording/playing
- IMPROVED 4K SDI Detection
- IMPROVED Playback in all modes

SOFTWARE UPDATES

CD Apple ProRes Transfer Tool v2 .5
- Minor Bug Fixes
- Windows and Mac versions available

CD RAW / DPX Wave Timecode App
- For timecode syncing Wave audio files with RAW & DPX files in Resolve
- Can be used with current and previous firmwares
- Mac Only

KNOWN ISSUES:

Audio
- When playing back short 50/60p files if “Skip Frames” is not set, audio static can occur. Recorded files are unaffected.

Play
- Canon RAW playback may be jumpy. To correct, select a point within the clip and press PLAY. If this does not correct issue, deselect clip then reselect.

Record
- Pixel Zoom, Vectorscope, and Spot Meter are disabled during record in Quad-HD, Dual-HD, Dual-4K, and 2K High Speed Apple ProRes to avoid recording errors.
- Record spanning from SSD 2 back to SSD 1 is no longer supported.
- 1.5G-SDI Quad-Link for 4K/UHD up to 30p is no longer supported (use 3G-SDI Dual-Link). 3G-SDI Quad-Link for 4K/UHD up to 60p is supported.
- In rare cases when switching frame rates on the FS700, a false camera trigger may occur, resulting in a 1 second file.
- When recording Sony FS 4K RAW-> 4K/UHD Apple ProRes at 50/59.94p, using Pixel Zoom will shift image on OLED. Recorded files are unaffected.
- In Canon RAW, in rare cases Odyssey may misinterpret frame rate changes on the camera. To correct, toggle in and out of Playback, or remove and reconnect SDI A input.
- In IO 4K RAW, when powered off the camera will revert to 4K30p. To set to 4K60p, disconnect SDI C on Odyssey, change camera setting to 4K60p, then reconnect SDI C.
- ARRI 6G-SDI not currently supported. BlackMagic Design 6G-SDI is supported.
- In FS RAW, occasionally in 2K High Speed RAW->Apple ProRes 100/120/200/240, the audio recorded will be static. To correct, switch out of and then return to this record mode.

Apollo
- In Apollo mode, when using LTC In timecode source, cameras must be genlocked to prevent timecode drift.
- In Apollo mode, when using Pixel Zoom, on-screen camera angle labels may not be correctly aligned.
- In Apollo mode, Anamorphic Desqueeze is not available.
- Apollo Dual-4K does not support loss of source. If either video signal is lost the recording will stop.
- In Apollo Mode, Camera Trigger from Master Input B not functional.
- In Apollo Mode, Master Camera does not affect Analog Audio. If selected, Analog Audio is always sent to Input A and Quad-Split/Live-Switch.
- In Apollo mode, occasionally when playing back A,B,C,D + Live Switch the image will appear incorrect (inverted or wrong colors on one or more of the video outputs). To correct, RESET the the unit.

ODYSSEY/APOLLO FIRMWARE UPDATE INSTRUCTIONS:

To update firmware on an Odyssey or Apollo device, a Convergent Design SSD or a qualified 3rd party SSD must be used. Note that previously recorded files will not be playable on the unit once updated, so all files on the SSD and any other SSDs must be downloaded before updating.

1. ERASE & FORMAT the SSD on an Odyssey or Apollo.
2. Mount this SSD to a computer using an SSD adapter/reader to USB-3 or Thunderbolt.
3. Click DOWNLOAD NOW button on this page to download the Firmware Update to a folder on the computer. Do not download directly to the SSD. Convergent Design recommends a copy of the firmware update be maintained on the computer for possible future use.
4. On a Windows computer, unzip the download. Open the unzipped folder.
5. On a Mac, the download will automatically unzip. Open the folder.
6. Within the download folder, copy the }Odyssey_Update{ folder from your computer to the root director of the SSD. This may also be shown as a }CD_Update{ folder.
- Copy to the root directory; do NOT copy it into the }Clips{________Odyssey folder.
- Copy the complete }CD_Update{ folder; do NOT copy individual files within the folder.
- Copy only the }CD_Update{ folder, do NOT copy the entire contents of the folder download.
Note that the download’s other content includes useful software, instructions and manuals.
7. Dismount the SSD from the computer and insert into Odyssey or Apollo.
8. Power on Odyssey or Apollo.
- A notice will appear recommending the use of AC power as the firmware update can take up to 45 minutes to complete.
- There are CANCEL and OK buttons at the bottom of the OLED screen, but the update will proceed automatically after 30 seconds.
- During update a progress bar indicates how the update is proceeding, but in some cases the OLED screen will go black.
- If this should happen, the update is still in progress so the device should be allowed to continue for one hour, then power cycled (see below).
- Plugging a signal into SDI A IN will sometimes correct this issue.
9. When the progress bar reaches 100%, remove the SSD from the unit and power down.
10. Power on the unit. When it completes booting, insert the same SSD.
11. The Firmware Update notice will appear again. Press CANCEL.
12. ERASE & FORMAT the SSD.
NOTE: It is recommended that all users do a factory reset after the firmware update is complete.

About Video Recorder Adapters:

Applying a new firmware package on your Video Recorder adapter should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The Video Recorder adapter should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the adapter’s software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates..

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers