HP LaserJet M525c Printer Firmware 2308209_000570 Download

Posted at December 18, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	HP LaserJet M525c Printer Firmware 2308209_000570
Category	Printer
Manufacturer	HP
File Size	143.8 MB
Supported OS	OS Independent

HP LaserJet M525c Printer Firmware 2308209_000570 Description

This document contains information for the firmware revision number:
- Firmware Datecode: 20160820
- Firmware Revision: 2308209_000570 

ENHANCEMENT:

Security/Authentication:

- Added a usability improvement for customers using certain pull print & authentication solutions (such as HP Access Control) which populate the username, domain & home folder path as attributes. In these environments if the user preauthenticates with their badge (taps first) before entering a Save to Network Folder application quick set configured with Personal Share & verify access, the device will only require the user's password.
- Added Server Name Indication (SNI, section 3 of RFC 6066) support in TLS handshake for improved compatibility in certain configurations of Active Directory Federation Service (ADFS) on Internet Information Services (IIS) 8 or later or possibly other applications.

Base:

- Introduced a secure pull print job purge feature where when using a pull print solution and there is a condition on the device that requires user intervention, a job purge mode will be tied to the inactivity timeout. Job purge is limited to up to 3 jobs in the current print queue. To enable, select "Cancel Print Jobs after Unattended Error" in the devices EWS Security - General tab.
- Upgraded the font library to UFST 7.3.1. The focus areas are Error handling for TrueType fonts and OpenType CFF fonts.
- Mediatype "HP EcoSMARTLite" has been renamed to "HP EcoFFICIENT".
- Role-Based Access to EWS - provides ability to limit access to EWS items via defined roles. Note: If configured using 3.7.4, feature changes in next fleet release may cause some access controls to be lost. See white paper for details. 
- Added functionality to allow users to cancel A3 jobs on A4 printers, mainly targeted for Pull printing customers. 

Digital Sending:

- The number of allowed domains in the Email Domain Restriction has been increased from 20 to 50.
- Added a feature to show secondary credentials as soon as the user starts a job that requires credentials (Folder, SharePoint) but credentials are missing. The secondary credentials prompt should be displayed regardless of the setting "verify folder access prior to job start" is enabled or disabled.
- TWAIN scanning support on Network connected MFPs. The scan can be initiated using an HP or non HP TWAIN client application. The feature would also support ‘Job Reservations’ to complete the remote scan requests from the Control Panel of the MFP.

Fax:

- Added alphanumeric keypad support for fax.

How to perform firmware upgrades:

Embedded Web Server:

(control panel is at a Ready screen)

After uncompressing the file you will see a xxxxxxx.bdl file.
1. Open an Internet Browser Window.
2. Enter the IP address in the URL line.
3. Select the Firmware Upgrade link from within the Troubleshooting tab.
4. Browse to the location that the firmware upgrade file was downloaded to, and then select the firmware file. Select the Install button to perform the upgrade.
NOTE: Do not close the Browser Window or interrupt communication until the Embedded Web Server displays the Confirmation Page.
5. Select Restart Now from the EWS confirmation page, or turn the product off and then on again using the power switch. The printer will not automatically reboot.

Pre-Boot walk-up USB thumb drive:

(control panel Pre-Boot menu)

NOTE: Only to be used if the printer is not able to boot to READY
After uncompressing the file you will see a xxxxxxx.bdl file.
1. Copy the xxxxxxx.bdl file to a portable USB flash memory storage device (thumb drive). USB Flash Drives with a CD formatted partition may not be recognized by the printer. You may need to try a different USB flash drive.
NOTE: USB Flash Drives that are not in a Fat32 format or having a CD formatted partition may not be recognized by the printer. You may need to try a different USB flash drive.
2. Turn the printer ON.
3. Press the HP logo in the middle of the screen when you see the “1/8” under the logo.
4. Press the Down arrow to highlight Administrator, and then press the OK key.
5. Press the Down arrow to highlight Download, and then press the OK key.
6. Insert the portable USB storage device with the xxxxxxx.bdl file on it.
7. Press the Down arrow to highlight USB Thumbdrive, and then press the OK key.
8. Press the Down arrow to highlight the xxxxxxx.bdl file, and then press the OK key.
NOTE: Please make sure the firmware file is located in the root directory of the flash drive. If you have more than one .bdl file on your USB flash drive, select the file you want loaded and press OK.
Please be patient since this may take up to 10 minutes to reboot.
9. When the message Complete appears on the control panel display, press the Back button several times until you see the Continue menu, then press the OK key.
10. The printer will continue to boot to the Ready state.

Walk-up USB thumb drive:

(Standard control panel menu)

After uncompressing the file you will see a xxxxxxx.bdl file.
1. Copy the xxxxxxx.bdl file to a portable USB flash memory storage device (thumb drive).
NOTE: USB Flash Drives that are not in a Fat32 format or having a CD formatted partition may not be recognized by the printer. You may need to try a different USB flash drive.
2. Turn the printer ON.
3. Scroll down and select the Device Maintenance application.
4. Select the USB Firmware Upgrade menu.
5. Insert the portable USB storage device with the xxxxxxx.bdl file on it into the USB port on the front control panel of the product.
6. Select and highlight the xxxxxxx.bdl file you would like to use.
NOTE: If there is more than one xxxxxxx.bdl file on the storage device, make sure that you select the correct file for this product.
7. Select the Upgrade button on the bottom of the screen.
8. Next select the Upgrade, Re-install or Downgrade depending on the task you want to complete that the firmware install will start.
When the upgrade is complete, the printer will reboot automatically.
NOTE: The upgrade process may take 10 or more minutes to complete. Please do not interrupt the updating process.

About Printer Firmware Package:

Before you even consider installing this firmware, go to the system information page of the device and make sure that the version currently installed on it isn’t newer or matching this one.

If you upgrade to this build, imaging devices can get printing and scanning quality improvements, new options added to the setup menu, feature enhancements, various fixes, as well as several other changes that can boost stability.

Considering the large number of devices and manufacturers, as well as the wide variety of methods for upgrading imaging units, we recommend that you read the installation steps and initiate a firmware update process only when you have familiarized yourself with the procedure.

In addition to that, it would be best if you perform this task in a steady power environment such as the one ensured by a UPS unit. Also, make sure you don’t power off the imaging device or use its buttons during the installation, in order to avoid any malfunctions.

Therefore, if you intend to apply this version, click the download button, and install the package. Remember to check with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related HP Drivers