Buffalo TS1200D NAS Firmware 1.50 Download

Posted at December 31, 2024 by PCI-DB Team

Buffalo TS1200D NAS Firmware 1.50 Description

Bug Fixes:

- [GLIBC]: Modified to deal with GLIBC programming vulnerabilities (CVE-2015-7547).
- [lighttpd]: Modified to deal with lighttpd programming vulnerabilities (CVE-2013-4559 and CVE-2014-2323).
- [Bash]: Modified to deal with Bash programming vulnerabilities (CVE-2014-7186 and CVE-2014-7187).
- [OpenSSL]: Modified to deal with OpenSSL programming vulnerabilities (CVE-2016-2176, CVE-2016-2109, CVE-2016-2108, CVE-2016-2107, CVE-2016-2106, and CVE-2016-2105).
- [ImageMagick]: Modified to deal with an ImageMagick filtering vulnerability (CVE-2016-3714).
- [Samba]: Modified to deal with Samba programming vulnerabilities, including Badlock vulnerability (CVE-2016-2112, CVE-2016-2115, CVE-2016-2118, CVE-2016-2110, CVE-2016-2111, CVE-2015-5370, CVE-2016-2113, CVE-2016-2114, CVE-2015-5252, CVE-2015-5296, CVE-2015-5299, and CVE-2015-7560).
- [Samba]: Fixed a bug where the access-restricted folder reserved for admin users could not be accessed after initializing settings.
- [Email Notifications]: Fixed a bug where some notification emails were detected as spam by a mail server. As a countermeasure for this bug, the "Sender Address" box has been added to the email notification settings page in Settings.
- [Sleep Timer]: Fixed a bug where the shutdown configured via the timer schedule did not work properly.
- [WebAccess]: Fixed a bug where multiple files could not be uploaded at a time.
- [WebAccess]: Fixed a bug where WebAccess did not work properly if the WebAccess settings were configured to use UPnP.
- [NFS]: Fixed a bug where the shared folder selection window was not displayed properly when adding NFS rules if multiple shared folders with NFS enabled were created.
- [Microsoft Network]: Fixed a bug where domain users could not access shared folders if the group that these domain users joined is configured for access restrictions.
- [UPS]: Changed to have the E10 error display when the connection between the TeraStation and the UPS could not be established.
- [Backup]: Fixed a bug where Settings could not be accessed.
- [Backup]: The backup target folder for a backup job where a different TeraStation is the backup source has been changed to "backup target folder"/"date"/"backup source folder".
- [FTP]: Fixed a bug where the TeraStation could not be accessed via FTP after configuring access restrictions with a group that includes a specific number of members, then restarted.
- [FTP]: Fixed a bug where files that are 2 GB or larger could not be transferred.
- [System]: Fixed a bug where a working drive was erroneously identified as malfunctioning.
- [System]: Fixed a bug where the "Size on disk" of files on the TeraStation was displayed larger than the actual size on Windows 8.1 or later.
- [System]: Fixed a bug where the CPU became overloaded when a test email was sent using the wrong settings.
- [Services]: Fixed a bug where music files did not recognized if a subfolder that contains a space in its folder name was configured as iTunes public folder.
- [Network]: Fixed a bug where an IP address could not be re-assigned correctly when the Ethernet cable was removed if the IP address that begins with "169.254" was assigned because the Ethernet interface has become disabled since removing the Ethernet cable.

Caution:

- Please consult your local technical support representative if you experience any problems caused by this firmware update.
- Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.
- USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.

How to Use the Updater:

1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
For example, if the IP address and subnet mask of the computer are
" 192.168.0.10 , 255.255.255.0 "
and the IP address and subnet mask of the TeraStation are
" 192.168.1.150 , 255.255.255.0 "
then the updater will _not_ work properly.
In this case, reconfigure the TeraStation's IP address and subnet mask to
" 192.168.0.150 , 255.255.255.0 ".
Then they will be on the same subnet and the updater will work properly.
2. Close all applications. Also, stop or exit any firewall software.
3. Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open.
4. Select the TeraStation to update if multiple TeraStation are connected.
5. Click "Update" and enter the TeraStation's admin password.
6. Click "OK".
7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
8. When the update finishes, a message will be displayed.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Buffalo Drivers