TRENDnet TI-PG1284i v1.0R Switch Firmware 1.1.4.S0 Download

Posted at April 29, 2024 by PCI-DB Team

TRENDnet TI-PG1284i v1.0R Switch Firmware 1.1.4.S0 Description

Fixes:

- Ability to change HTTP management TCP port
- Ability to force HTTPS only instead of HTTP for management
- Ability to change Telnet TCP port

Firmware Upgrade Procedure 

1. Save the downloaded firmware file (.zip) to your PC
2. Right click on the downloaded file and select Extract All or Extract Here option
a. Make sure to remember the location where the extracted file will be saved.
3. Log into to the switch configuration page
Default URL/IP address http://192.168.10.200
Default User Name: admin
Default Password: admin
4. Navigate to the Management section, click on Maintenance, and click on Firmware.
5. Under the Upgrade Firmware section, click Browse or Choose File and select firmware file (.fw) from the extracted files and click the Upgrade button to start the firmware upgrade process.
6. Wait until the firmware upload has completed and the device reboots.
7. The firmware upgrade is complete.

WARNING

- Firmware upgrade failure may permanently damage the unit and cause it to malfunction. 
- Do not interrupt the firmware upgrade process by disconnecting it from the network or unplugging its power from the power outlet once the firmware upgrade process has begun.
- Never perform a firmware upgrade over wireless connections or via remote access connections.
- If the items listed in the release notes do not address an issue you are experiencing, please do not upgrade the firmware.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TRENDnet Drivers