Buffalo TS5410DN NAS Firmware 3.00 for Mac OS Download

Posted at November 22, 2024 by PCI-DB Team

Buffalo TS5410DN NAS Firmware 3.00 for Mac OS Description

Added and Modified Features:

- [Virus Scan]: Trend Micro NAS Security is now supported. The antivirus will protect files in the shared folders including USB drives from virus infection. To activate this function, a license (sold separately) should be registered.
- [Access Restrictions]: Subfolders' and subfiles' access restrictions are now available.
- [Firmware Recovery]: The TeraStation now has recovery mode to recover the corrupted firmware when the unit doesn't boot properly. The unit can enter recovery mode by turning it on while holding down the function button.
- [WebAccess]: Music files are now playable from browsers that don't support flash player.
- [RAID]: Improved to reduce RAID rebuild and scan times.
- [USB Drives]: Following external USB drive models are now supported: HD-DT/R6 series and HD-HT/R6 series
- [Dropbox]: Added to verify an SSL certificate for the proxy server.
- [Port Trunking]: Added "ALB" to the port trunking policy. It will distribute incoming and outgoing network packets' traffic loads.
- [Backup, Replication, and Failover]: Subfolders' access restriction settings can be inherited to the destinations. To inherit the settings, both sources and destinations should be the TS3010 series or TS5010 series TeraStations running firmware version 3.00 or later.
- [Settings]: Improved the response speed when logging in.
- [System]: Improved the contents of system log.
- [System]: Improved usability of display buttons on the TeraStation.

Bug Fixes:

- [NFS]: Fixed a bug where shared folder lists on adding NFS rules were not displayed properly if multiple shared folders for which NFS protocols are enabled were created.
- [NFS]: Fixed a bug where a shared folder that contains multibyte characters in its name could not be accessed via NFS connections. Accessing shared folders whose names contain multibyte-character from Windows computers is not supported.
- [WebAccess]: Fixed a bug where a folder that contains a 4 GB or larger file could not be downloaded.
- [Drives]: Fixed a bug where the wrong drive number was informed as a drive failure in a notification email.
- [Drives]: Fixed a bug where the bootup process took time when disconnecting a drive while the TeraStation is off and it is powered on.
- [Drives]: Fixed a bug where the I31 error message did not disappear after configuring a drive as a spare drive using the function button.
- [RAID]: Fixed a bug where a spare drive was wrongly displayed as failed on Settings even if the drive is not malfunctioning.
- [RAID]: Fixed a bug where the I46 and I47 error messages did not disappear after configuring the unit to RAID 5 using RMM.
- [USB Drives]: Fixed a bug where NAS Navigator2 shows an XFS-formatted USB drive as unformatted.
- [Network]: Fixed a bug where NTP settings became disabled automatically when the initial setup was made under the environment that the TeraStation could not access to an NTP server.
- [SNMP]: Fixed a bug where firmware update value was wrong which were gotten by SNMP.
- [Backup, Replication, and Failover]: Fixed a bug where canceled files remained when backup jobs or replication tasks were canceled.
- [Backup, Replication, and Failover]: Fixed a bug where the I33 error message was not displayed even if the replication destination was not reachable.
- [Backup, Replication, and Failover]: Fixed a bug where failover could not be configured if all drives were not inserted.
- [Backup, Replication, and Failover]: Fixed failover trigger.
- [Backup, Replication, and Failover]: Fixed a bug where the "Configuring failover..." message was not displayed when logging in to the backup unit's Settings after restarting.
- [Time Machine]: Fixed a bug where shared folders which were not configured for Time Machine were displayed on macOS.
- [UPS]: Fixed a bug where UPS sync didn't work after disconnecting and reconnecting a USB cable.

Caution:

- Please consult your local technical support representative if you experience any problems caused by this firmware update.
- Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.
- USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.

How to Use the Updater:

1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
For example, if the IP address and subnet mask of the computer are
" 192.168.0.10 , 255.255.255.0 "
and the IP address and subnet mask of the TeraStation are
" 192.168.1.150 , 255.255.255.0 "
then the updater will _not_ work properly.
In this case, reconfigure the TeraStation's IP address and subnet mask to
" 192.168.0.150 , 255.255.255.0 ".
Then they will be on the same subnet and the updater will work properly.
2. Close all applications. Also, stop or exit any firewall software.
3. Extract the downloaded file and run "TSUpdater.exe". When a TeraStation is detected, an update window will open.
4. Select the TeraStation to update if multiple TeraStation are connected.
5. Click "Update" and enter the TeraStation's admin password.
6. Click "OK".
7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
8. When the update finishes, a message will be displayed.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Buffalo Drivers