D-Link DWS-4026 rev.A1G Access Point Firmware 4.3.0.3_B028 Download

Posted at December 22, 2024 by PCI-DB Team

D-Link DWS-4026 rev.A1G Access Point Firmware 4.3.0.3_B028 Description

New Features:

1. Support new AP models: DWL-6610/DWL-6700/DWL-8710 AP.
2. Support Band Steering.
3. Hided [Disconnected AP Data Forwarding Mode] and [Disconnected AP Management Mode] configuration drop-list from Web GUI. (WLan -> Admin -> Adv Conf->AP Profile->Global)
4. Showing neighbor APs signal strength and the operation channel in [Managed Access Point Neighbor AP Status] Web GUI. (WLan -> Monitoring -> AP -> Managed AP Status -> (tab)Neighbor APs)
5. Increased Local AP Database size from 128 to 256.
6. CP Logout Mode - User now to choice the current design to Pop up a Captive Portal Logout Window, or the new implement that using the Welcome page that without popup a new window.
7. Redirect Client To Original URL option - Redirect Client to the original URL after login CP success. The original URL is the web page path that user attempted to open before be redirected to CP login page.
8. Now AP DDP function can be disabled via AP Profile Global Configuration and push the setting to AP.
9. Added Factory Reset and Factory Reset All functions to reset managed APs to factory mode.
10. Increase Known Clients List from 512 to 1024.
11. New Cli Commands to Enable/Disable All APs at one time. wireless ap debug all no wireless ap debug all
12. Support“Multicast to Unicast” and “DHCP Offer/ACK to Unicast”.
13. Support RADIUS Framed-IP-Address (8) Attribute for Accounting.
14. Now the Wireless Log is supported the legacy R1 firmware version style.

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers