ASUS DSL-AC56U Router Firmware 1.1.2.2 Download

Posted at December 22, 2024 by PCI-DB Team

ASUS DSL-AC56U Router Firmware 1.1.2.2 Description

Release Note

- DSL driver updated - v5.5.2.3.
- Fixed IOT issues with specific version of ECI DSLAM.
- Fixed VDSL2 upstream speed limited issue with certain DSLAM.
- Fixed cannot sync up with ADSL2+ mode with certain Annex B DSLAM issue.
- Fixed ADSL2+ mode long loop extra sync time needed issue with certain DSLAM.
- Disable bitswap automatically in G.dmt mode for specific DSLAM.
- For Quick Internet Setup(QIS) VDSL WAN(PTM) Country: UK/ Australia/ Germany, enable G.INP (G.998.4) by default.
- Now supports OpenVPN Server/Client feature.
- Now supports Bandwidth Limiter feature.
- Support 802.1Q VLAN tag in Ethernet WAN mode.
- Support Reboot Scheduler feature.
- Support Guest Network - MAC Filter feature.
- Now supports USB tethering.
- Support DSL Line Diagnostic(Debug Log Capture) feature(Administration > Feedback).
- Support SSH(Administration > System).
- Fixed WiFi related issues.
- OpenSSL updated - 1.0.2d.
- Add DSL Setting > ESNP - Enhanced Sudden Noise Protection (ADSL).
- Drop SSH/Telnet from WAN when firewall disabled.
- Modified the access rights of account mode and share mode to asusware.platform path when lighttpd server is enabled.
- Modified the access rights to specific port of UPnP server.
- Restricted access from wan method to enhance security.
- Fixed Parental Control related issues.
- Fine tune Gigabit switch driver.
- Fine tune WiFi Auto Channel mechanism.
- Include UI/ SSH/ Telnet login brute-force attack protection mechanism.
- Fixed AiCloud live update firmware related issues.
- Fixed various UI related issues.
- Quick Internet Setup(QIS) enhancements.
- Display current downstream SNR Margin in DSL Setting page.
- AiCloud updated - v2.0.2.1(with lighttpd-1.4.39, security improvement).
- Fixed the bug that the UPnP chain would be cleared when change the port forwarding setting.
- Display WiFi current control channel(Wireless > General).
- Add Dualwan Enable/Disable button(Internet Status).
- Fine tune DSL Log display.
- Fixed LED On/Off related issues.
- Fixed 802.1Q VLAN ID settings failed to take effect in QIS ADSL WAN(ATM) mode issue.
- Fixed Network Map > client list-Manufacturer not display issue.
- Remove PPP connect manually option, replaced by Network Map > Internet Connection switch.
- Modify the default TimeZone as GMT.
- USB file system driver updated.
- Fine tune WiFi Scheduler feature.
- PPTP VPN client supports encryption options. Remove auto reconnection.
- Update pppd to support mppc.
- Fine tune DSL Setting.
- Fixed WiFi Guest Network related issues.
- Fixed Traffic Monitor - Daily/Last 24 Hours traffic calculation incorrect issue.
- Fine tune System log.
- Fine tune VPN Server UI.
- Add LAN > DHCP Server > DNS Server 2.
- Fine tune DoS function, update rules.
- Fine tune WOL feature.
- Traffic Manager > QoS > User Specify Rule List extend Max Limit to 32.

VDSL WAN (PTM) QIS manual setting list updated.

- Add Australia ISP, TPG (VLAN ID 2).
- Add Australia ISP, Wondercom.
- Add Australia ISP, iiNet.
- Add Australia ISP, Internode.
- Add Australia ISP, Varsity Internet.
- Add Germany ISP, O2 (VLAN ID 12).
- Add Germany ISP, QSC (VLAN ID 7).
- Modify Thailand ISP, 3BB VDSL.
- Add Thailand ISP, 3BB 15M/1.5M.
- Add Switzerland ISP, Swisscom.

ADSL WAN (ATM) QIS manual setting list updated.

- Modify Thailand ISP, 3BB 10M/1M.
- Add Thailand ISP, 3BB 15M/1.5M.
- Add Spain ISP, Jazztel (PPPoE, VLAN ID 1074)

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ASUS Drivers